MPC8548ECPXATHC datasheet(42/151 Pages) FREESCALE

42 / 151 page

MPC8548E PowerQUICC III Integrated Processor Hardware Specifications, Rev. 9

Freescale Semiconductor

Ethernet Management Interface Electrical Characteristics

Figure 21 shows the MII management AC timing diagram.

Figure 21. MII Management Interface Timing Diagram

MDC fall time

tMDHF

—10

Notes:

1. The symbols used for timing specifications follow the pattern of t(first two letters of functional block)(signal)(state)(reference)(state) for

inputs and t(first two letters of functional block)(reference)(state)(signal)(state) for outputs. For example, tMDKHDX symbolizes management

data timing (MD) for the time tMDC from clock reference (K) high (H) until data outputs (D) are invalid (X) or data hold time.

Also, tMDDVKH symbolizes management data timing (MD) with respect to the time data input signals (D) reach the valid state

(V) relative to the tMDC clock reference (K) going to the high (H) state or setup time. For rise and fall times, the latter convention

is used with the appropriate letter: R (rise) or F (fall).

2. This parameter is dependent on the eTSEC system clock speed, which is half of the Platform Frequency (fCCB). The actual

ECn_MDC output clock frequency for a specific eTSEC port can be programmed by configuring the MgmtClk bit field of

device’s MIIMCFG register, based on the platform (CCB) clock running for the device. The formula is: Platform Frequency

(CCB)

 (2 × Frequency Divider determined by MIICFG[MgmtClk] encoding selection). For example, if

MIICFG[MgmtClk] = 000 and the platform (CCB) is currently running at 533 MHz, fMDC = 533)  (2 × 4 × 8) = 533)  64 =

8.3 MHz. That is, for a system running at a particular platform frequency (fCCB), the ECn_MDC output clock frequency can be

programmed between maximum fMDC = fCCB  64 and minimum fMDC = fCCB  448. See 14.5.3.6.6, “MII Management

Configuration Register (MIIMCFG),” in the MPC8548E PowerQUICC™ III Integrated Processor Family Reference Manual for

more detail.

3.The maximum ECn_MDC output clock frequency is defined based on the maximum platform frequency for device (533 MHz)

divided by 64, while the minimum ECn_MDC output clock frequency is defined based on the minimum platform frequency for

device (333 MHz) divided by 448, following the formula described in Note 2 above.

4. Guaranteed by design.

5. tCCB is the platform (CCB) clock period.

Table 37. MII Management AC Timing Specifications (continued)

At recommended operating conditions with OVDD is 3.3 V ± 5%.

Parameter

Symbol1

Min

Typ

Max

Unit

Notes

MDC

tMDDXKH

tMDC

tMDCH

tMDCR

tMDCF

tMDDVKH

tMDKHDX

MDIO

(Input)

(Output)

MPC8548ECPXATHC датащи(PDF) 42 Page - Freescale Semiconductor, Inc

MPC8548ECPXATHC датащи(HTML) 42 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL