PIC16F87 datasheet(99/230 Pages) MICROCHIP

99 / 230 page

 2002-2013 Microchip Technology Inc.

DS30487D-page 99

PIC16F87/88

11.1

AUSART Baud Rate Generator

(BRG)

The BRG supports both the Asynchronous and

Synchronous modes of the AUSART. It is a dedicated

8-bit Baud Rate Generator. The SPBRG register

controls the period of a free running 8-bit timer. In Asyn-

chronous mode, bit BRGH (TXSTA<2>) also controls

the baud rate. In Synchronous mode, bit BRGH is

ignored. Table 11-1 shows the formula for computation

of the baud rate for different AUSART modes which

only apply in Master mode (internal clock).

Given the desired baud rate and FOSC, the nearest

integer value for the SPBRG register can be calculated

using the formula in Table 11-1. From this, the error in

baud rate can be determined.

It may be advantageous to use the high baud rate

(BRGH = 1) even for slower baud clocks. This is

because the FOSC/(16(X + 1)) equation can reduce the

baud rate error in some cases.

Writing a new value to the SPBRG register causes the

BRG timer to be reset (or cleared). This ensures the

BRG does not wait for a timer overflow before

outputting the new baud rate.

11.1.1

AUSART AND INTRC OPERATION

The PIC16F87/88 has an 8 MHz INTRC that can be

used as the system clock, thereby eliminating the need

for external components to provide the clock source.

When the INTRC provides the system clock, the AUS-

ART module will also use the INTRC as its system

clock.

Table 11-1

shows

some

the

INTRC

frequencies that can be used to generate the AUSART

module’s baud rate.

11.1.2

LOW-POWER MODE OPERATION

The system clock is used to generate the desired baud

rate; however, when a low-power mode is entered, the

low-power clock source may be operating at a different

frequency than in full power execution. In Sleep mode,

no clocks are present. This may require the value in

SPBRG to be adjusted.

11.1.3

SAMPLING

The data on the RB2/SDO/RX/DT pin is sampled three

times by a majority detect circuit to determine if a high

or a low level is present at the RX pin.

TABLE 11-1:

BAUD RATE FORMULA

TABLE 11-2:

REGISTERS ASSOCIATED WITH BAUD RATE GENERATOR

SYNC

BRGH = 0 (Low Speed)

BRGH = 1 (High Speed)

(Asynchronous) Baud Rate = FOSC/(64(X + 1))

(Synchronous) Baud Rate = FOSC/(4(X + 1))

Baud Rate = FOSC/(16(X + 1))

N/A

Legend: X = value in SPBRG (0 to 255)

Address

Name

Bit 7

Bit 6

Bit 5

Bit 4

Bit 3

Bit 2

Bit 1

Bit 0

Value on:

POR, BOR

Value on

all other

Resets

98h

TXSTA

CSRC

TX9

TXEN

SYNC

—BRGH

TRMT

TX9D

0000 -010

18h

RCSTA

SPEN

RX9

SREN

CREN

ADDEN

FERR

OERR

RX9D

0000 000x

99h

SPBRG

Baud Rate Generator Register

0000 0000

Legend:

= unknown, - = unimplemented, read as ‘0’. Shaded cells are not used by the BRG.

PIC16F87 датащи(PDF) 99 Page - Microchip Technology

PIC16F87 датащи(HTML) 99 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL