| поискавой системы для электроныых деталей |
|
S29GL01GS датащи(PDF) 60 Page - SPANSION |
|
|
|||||||||||||||||||||||||||||
S29GL01GS датащи(HTML) 60 Page - SPANSION |
|
60 / 104 page ![]() 60 GL-S MirrorBit® Family S29GL_128S_01GS_00_06 March 16, 2012 Da ta Sh e e t 6.2 Device ID and Common Flash Interface (ID-CFI) ASO Map The Device ID portion of the ASO (word locations 0h to 0Fh) provides manufacturer ID, device ID, Sector Protection State, and basic feature set information for the device. ID-CFI Location 02h displays sector protection status for the sector selected by the sector address (SA) used in the ID-CFI enter command. To read the protection status of more than one sector it is necessary to exit the ID ASO and enter the ID ASO using the new SA. The access time to read location 02h is always tACC and a read of this location requires CE# to go High before the read and return Low to initiate the read (asynchronous read access). Page mode read between location 02h and other ID locations is not supported. Page mode read between ID locations other than 02h is supported. For additional information see ID-CFI ASO on page 35. Table 6.2 ID (Autoselect) Address Map Description Address Read Data Manufacture ID (SA) + 0000h 0001h Device ID (SA) + 0001h 227Eh Protection Verification (SA) + 0002h Sector Protection State (1= Sector protected, 0= Sector unprotected). This protection state is shown only for the SA selected when entering ID-CFI ASO. Reading other SA provides undefined data. To read a different SA protection state ASO exit command must be used and then enter ID-CFI ASO again with the new SA. Indicator Bits (SA) + 0003h DQ15-DQ08 = 1 (Reserved) DQ7 - Factory Locked Secure Silicon Region 1 = Locked, 0 = Not Locked DQ6 - Customer Locked Secure Silicon Region 1 = Locked 0 = Not Locked DQ5 = 1 (Reserved) DQ4 - WP# Protects 0 = lowest address Sector 1 = highest address Sector DQ3 - DQ0 = 1 (Reserved) RFU (SA) + 0004h Reserved (SA) + 0005h Reserved (SA) + 0006h Reserved (SA) + 0007h Reserved (SA) + 0008h Reserved (SA) + 0009h Reserved (SA) + 000Ah Reserved (SA) + 000Bh Reserved Lower Software Bits (SA) + 000Ch Bit 0 - Status Register Support 1 = Status Register Supported 0 = Status Register not supported Bit 1 - DQ polling Support 1 = DQ bits polling supported 0 = DQ bits polling not supported Bit 3-2 - Command Set Support 11 = reserved 10 = reserved 01 = Reduced Command Set 00 = Classic Command set Bits 4-15 - Reserved = 0 Upper Software Bits (SA) + 000Dh Reserved Device ID (SA) + 000Eh 2228h = 1 Gb 2223h = 512 Mb 2222h = 256 Mb 2221h = 128 Mb Device ID (SA) + 000Fh 2201h |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |