SPC56EC74L7 datasheet(73/118 Pages) STMICROELECTRONICS

73 / 118 page

SPC564Bxx - SPC56ECxx

Electrical Characteristics

Doc ID 17478 Rev 4

73/118

4.11.2

Electromagnetic interference (EMI)

The product is monitored in terms of emission based on a typical application. This emission

test conforms to the IEC61967-1 standard, which specifies the general conditions for EMI

measurements.

4.11.3

Absolute maximum ratings (electrical sensitivity)

Based on two different tests (ESD and LU) using specific measurement methods, the

product is stressed in order to determine its performance in terms of electrical sensitivity.

Electrostatic discharge (ESD)

Electrostatic discharges (a positive then a negative pulse separated by 1 second) are

applied to the pins of each sample according to each pin combination. The sample size

depends on the number of supply pins in the device (3 parts

× (n+1) supply pin). This test

conforms to the AEC-Q100-002/-003/-011 standard. For more details, refer to the

application note Electrostatic Discharge Sensitivity Measurement (AN1181).

Table 32.

EMI radiated emission measurement(1)(2)

Symbol C

Parameter

Conditions

Value

Unit

Min

Typ Max

—

SR — Scan range

—

0.150

1000 MHz

fCPU SR — Operating frequency

—

120

—

MHz

VDD_LV SR — LV operating voltages

—

1.28

—

SEMI CC T Peak level

VDD = 5V, TA =25°C,

LQFP176 package

Test conforming to IEC 61967-2,

fOSC = 40 MHz/fCPU = 120 MHz

No PLL frequency

modulation

—

dBµV

± 2% PLL frequency

modulation

——

14(3) dBµV

EMI testing and I/O port waveforms per IEC 61967-1, -2, -4.

For information on conducted emission and susceptibility measurement (norm IEC 61967-4), please contact your local

marketing representative.

All values need to be confirmed during device validation.

Table 33.

ESD absolute maximum ratings(1)(2)

Symbol

Ratings

Conditions

Class

Max value(3)

Unit

VESD(HBM)

Electrostatic discharge voltage

(Human Body Model)

TA = 25 °C

conforming to AEC-Q100-002

H1C

2000

VESD(MM)

Electrostatic discharge voltage

(Machine Model)

TA = 25 °C

conforming to AEC-Q100-003

200

VESD(CDM)

Electrostatic discharge voltage

(Charged Device Model)

TA = 25 °C

conforming to AEC-Q100-011

C3A

500

750 (corners)

All ESD testing is in conformity with CDF-AEC-Q100 Stress Test Qualification for Automotive Grade Integrated Circuits.

A device will be defined as a failure if after exposure to ESD pulses the device no longer meets the device specification

requirements. Complete DC parametric and functional testing shall be performed per applicable device specification at

room temperature followed by hot temperature, unless specified otherwise in the device specification.

Data based on characterization results, not tested in production.

SPC56EC74L7 датащи(PDF) 73 Page - STMicroelectronics

SPC56EC74L7 датащи(HTML) 73 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL