SH7021 datasheet(80/509 Pages) RENESAS

номер детали	SH7021

подробное описание детали	SuperH??RISC engine

PDF	509 Pages

Scroll/Zoom	100%

производитель	RENESAS [Renesas Technology Corp]

домашняя страница	http://www.renesas.com

Logo

80 / 509 page

RENESAS 61

Section 5 Interrupt Controller (INTC)

5.1

Overview

The interrupt controller (INTC) determines the priority of interrupt sources and controls interrupt

requests to the CPU. INTC has registers for assigning priority levels to interrupt sources. These

registers handle interrupt requests according to user-established priorities.

5.1.1

Features

The interrupt controller has the following features:

•

16 settable priority levels: Five interrupt priority registers can set 16 levels of interrupt

priorities for IRQ and on-chip peripheral interrupt sources.

•

The INTC has an NMI input level T bit that indicates NMI pin status. By reading this bit with

the interrupt exception service routine, the pin status can be checked for use in a noise

canceller function.

•

The interrupt controller can notify external devices (via the

IRQOUT pin) that an onchip

interrupt has been occured. In this way an external device can, for example, be informed if an

on-chip interrupt occurs while the chip is operating in a bus-released mode and the bus has

been requested.

5.1.2

Block Diagram

Figure 5.1 is a block diagram of the interrupt controller.

SH7021 датащи(PDF) 80 Page - Renesas Technology Corp