HD6432351 datasheet(119/1025 Pages) RENESAS

номер детали	HD6432351

подробное описание детали	16-Bit Single-Chip Microcomputer

PDF	1025 Pages

Scroll/Zoom	100%

производитель	RENESAS [Renesas Technology Corp]

домашняя страница	http://www.renesas.com

Logo

119 / 1025 page

Section 4 Exception Handling

Rev. 3.00 Sep 15, 2006 page 85 of 988

REJ09B0330-0300

4.3

Traces

Traces are enabled in interrupt control mode 2. Trace mode is not activated in interrupt control

mode 0, irrespective of the state of the T bit. For details of interrupt control modes, see section 5,

Interrupt Controller.

If the T bit in EXR is set to 1, trace mode is activated. In trace mode, a trace exception occurs on

completion of each instruction.

Trace mode is canceled by clearing the T bit in EXR to 0. It is not affected by interrupt masking.

Table 4.4 shows the state of CCR and EXR after execution of trace exception handling.

Interrupts are accepted even within the trace exception handling routine.

The T bit saved on the stack retains its value of 1, and when control is returned from the trace

exception handling routine by the RTE instruction, trace mode resumes.

Trace exception handling is not carried out after execution of the RTE instruction.

Table 4.4

Status of CCR and EXR after Trace Exception Handling

CCR

EXR

Interrupt Control Mode

I2 to I0

Trace exception handling cannot be used.

—

Legend:

1: Set to 1

0: Cleared to 0

—: Retains value prior to execution.

HD6432351 датащи(PDF) 119 Page - Renesas Technology Corp