HD6432351 datasheet(66/1025 Pages) RENESAS

номер детали	HD6432351

подробное описание детали	16-Bit Single-Chip Microcomputer

PDF	1025 Pages

Scroll/Zoom	100%

производитель	RENESAS [Renesas Technology Corp]

домашняя страница	http://www.renesas.com

Logo

66 / 1025 page

Section 2 CPU

Rev. 3.00 Sep 15, 2006 page 32 of 988

REJ09B0330-0300

General register ER7 has the function of stack pointer (SP) in addition to its general-register

function, and is used implicitly in exception handling and subroutine calls. Figure 2.9 shows the

stack.

Free area

Stack area

SP (ER7)

Figure 2.9 Stack

2.4.3

Control Registers

The control registers are the 24-bit program counter (PC), 8-bit extended control register (EXR),

and 8-bit condition-code register (CCR).

(1) Program Counter (PC)

This 24-bit counter indicates the address of the next instruction the CPU will execute. The length

of all CPU instructions is 2 bytes (one word), so the least significant PC bit is ignored. (When an

instruction is fetched, the least significant PC bit is regarded as 0.)

(2) Extended Control Register (EXR)

This 8-bit register contains the trace bit (T) and three interrupt mask bits (I2 to I0).

Bit 7—Trace Bit (T): Selects trace mode. When this bit is cleared to 0, instructions are executed

in sequence. When this bit is set to 1, a trace exception is generated each time an instruction is

executed.

Bits 6 to 3—Reserved: These bits are reserved. They are always read as 1.

HD6432351 датащи(PDF) 66 Page - Renesas Technology Corp