STM32F479 datasheet(12/91 Pages) STMICROELECTRONICS

номер детали	STM32F479

подробное описание детали	LCD-TFT display controller (LTDC) on STM32 MCUs

PDF	91 Pages

Scroll/Zoom	100%

производитель	STMICROELECTRONICS [STMicroelectronics]

домашняя страница	http://www.st.com

Logo

12 / 91 page

Display and graphics overview

AN4861

12/91

DocID029237 Rev 2

MIPI display parallel interface (MIPI-DPI)

The DPI standardizes the interface through a TFT controller. An example is when using a 16

to 24-bit RGB signaling in conjunction with synchronization signals (HSYNC, VSYNC, EN

and LCD_CLK).

The DPI is used to interface with a display without a framebuffer. The pixel data must be

streamed real time to the display.

The real-time performance is excellent, but it requires a high bandwidth in the MCU to feed

the display.

Figure 7. MIPI-DPI interface

MIPI display serial interface (MIPI-DSI)

In order to decrease the number of lines to interface with a display, the MIPI Alliance has

defined the DSI. The DSI is a high bandwidth multi-lane differential link; it uses standard

MIPI D-PHY for the physical link.

The DSI encapsulates either DBI or DPI signals and transmits them to the D-PHY through

the PPI protocol.

Figure 8 illustrates a MPI-DSI display interfacing example.

Figure 8. MIPI-DSI interface

STM32F479 датащи(PDF) 12 Page - STMicroelectronics