| поискавой системы для электроныых деталей |
|
SC68C752B датащи(PDF) 1 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
SC68C752B датащи(HTML) 1 Page - NXP Semiconductors |
|
1 / 49 page ![]() 1. General description The SC68C752B is a dual Universal Asynchronous Receiver/Transmitter (UART) with 64-byte FIFOs, automatic hardware/software flow control, and data rates up to 5 Mbit/s. The SC68C752B offers enhanced features. It has a Transmission Control Register (TCR) that stores receiver FIFO threshold levels to start/stop transmission during hardware and software flow control. With the FIFO Rdy register, the software gets the status of TXRDY/RXRDY for all four ports in one access. On-chip status registers provide the user with error indications, operational status, and modem interface control. System interrupts may be tailored to meet user requirements. An internal loopback capability allows on-board diagnostics. The UART transmits data, sent to it over the peripheral 8-bit bus, on the TX signal and receives characters on the RX signal. Characters can be programmed to be 5 bits, 6 bits, 7 bits, or 8 bits. The UART has a 64-byte receive FIFO and transmit FIFO and can be programmed to interrupt at different trigger levels. The UART generates its own desired baud rate based upon a programmable divisor and its input clock. It can transmit even, odd, or no parity and 1, 1.5, or 2 stop bits. The receiver can detect break, idle, or framing errors, FIFO overflow, and parity errors. The transmitter can detect FIFO underflow. The UART also contains a software interface for modem control operations, and has software flow control and hardware flow control capabilities. The SC68C752B is available in LQFP48 and HVQFN32 packages. 2. Features s Dual channel with Motorola µP interface s Up to 5 Mbit/s data rate s 64-byte transmit FIFO s 64-byte receive FIFO with error flags s Programmable and selectable transmit and receive FIFO trigger levels for DMA and interrupt generation s Software/hardware flow control x Programmable Xon/Xoff characters x Programmable Auto-RTS and Auto-CTS s Optional data flow resume by Xon any character s DMA signalling capability for both received and transmitted data s Supports 5 V, 3.3 V and 2.5 V operation s 5 V tolerant inputs s Software selectable baud rate generator SC68C752B 5 V, 3.3 V and 2.5 V dual UART, 5 Mbit/s (max.), with 64-byte FIFOs and Motorola µP interface Rev. 03 — 29 November 2005 Product data sheet |
Аналогичный номер детали - SC68C752B |
|
Аналогичное описание - SC68C752B |
|
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |