P12C508 datasheet(53/84 Pages) MICROCHIP

53 / 84 page

PIC12C5XX

DS40139A-page 53

Advance Information

10.0

ELECTRICAL CHARACTERISTICS - PIC12C5XX

Absolute Maximum Ratings†

Ambient Temperature under bias ............................................................................................................. –40˚C to +85˚C

Storage Temperature.............................................................................................................................. –65˚C to +150˚C

Voltage on VDD with respect to VSS ................................................................................................................ 0 to +7.5 V

Voltage on MCLR with respect to VSS(2) .......................................................................................................... 0 to +14 V

Voltage on all other pins with respect to VSS ............................................................................... –0.6 V to (VDD + 0.6 V)

Total Power Dissipation(1) ................................................................................................................................... 700 mW

Max. Current out of VSS pin.................................................................................................................................. 200 mA

Max. Current into VDD pin .................................................................................................................................... 150 mA

Max. Current into VDD pin (Vclamp active)........................................................................................................... 100 mA

Input Clamp Current, IIK (VI < 0 or VI > VDD)

.....................................................................................................................±20 mA

Output Clamp Current, IOK (VO < 0 or VO > VDD)

.............................................................................................................±20 mA

Max. Output Current sunk by any I/O pin ............................................................................................................... 25 mA

Max. Output Current sourced by any I/O pin.......................................................................................................... 25 mA

Max. Output Current sourced by I/O port (PORTA).............................................................................................. 100 mA

Max. Output Current sourced by I/O port with VDD clamp active(PORTA)............................................................. 50 mA

Max. Output Current sunk by I/O port (PORTA ) .................................................................................................. 100 mA

Note 1: Power Dissipation is calculated as follows: PDIS = VDD x {IDD -

∑ IOH} + ∑ {(VDD-VOH) x IOH} + ∑(VOL x IOL)

Note 2: Voltage spikes below Vss at the MCLR pin, inducing currents greater than 80 mA may cause latch-up. Thus,

a series resistor of 50 to 100W should be used when applying a low level to the MCLR pin rather than pulling

this pin directly to Vss.

†NOTICE: Stresses above those listed under "Maximum Ratings" may cause permanent damage to the device.

This is a stress rating only and functional operation of the device at those or any other conditions above those

indicated in the operation listings of this speciﬁcation is not implied. Exposure to maximum rating conditions for

extended periods may affect device reliability.

P12C508 датащи(PDF) 53 Page - Microchip Technology

P12C508 датащи(HTML) 53 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84

датащи скачать

ссылки URL