| поискавой системы для электроныых деталей |
|
AM3703CUS датащи(PDF) 203 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
AM3703CUS датащи(HTML) 203 Page - Texas Instruments |
|
203 / 280 page ![]() AM3715, AM3703 www.ti.com SPRS616F – JUNE 2010 – REVISED AUGUST 2011 6.5.2 Display Subsystem (DSS) NOTE For more information, see Display Subsystem chapter of the AM/DM37x Multimedia Device Technical Reference Manual (literature number SPRUGN4). The display subsystem (DSS) provides the logic to display the video frame from external (SDRAM) or internal (SRAM) memory on an LCD panel or a TV set. The display subsystem integrates the following elements: • Display controller (DISPC) module • Remote frame buffer interface (RFBI) module • NTSC/PAL video encoder • LCD display with: – Parallel Interface The two display supports can be active at the same time. 6.5.2.1 DSS —Parallel Interface In parallel interface, the paths of the display subsystem modules are the display controller and the RFBI. The display controller has two I/O pad modes and could be in the following configuration: • Bypass mode (RFBI disabled), which implements the MIPI DPI protocol • RFBI mode (RFBI enabled), which implements MIPI DBI 2.0 type B protocol For more information about MIPI DPI and MIPI DBI protocols, see the DSS chapter in the AM/DM37x Multimedia Device Technical Reference Manual (literature number SPRUGN4). 6.5.2.1.1 DSS —Parallel Interface—Bypass Mode Two types of LCD panel are supported: • Thin film transistor (TFT) or active matrix technology • Supertwisted nematic (STN) or passive matrix technology Both configurations are discussed in the following paragraphs. 6.5.2.1.2 DSS —Parallel Interface—Bypass Mode—TFT Mode Table 6-36 assumes testing over the recommended operating conditions and electrical characteristic conditions below (see Figure 6-30). Table 6-35. DSS Timing Conditions —TFT Mode TIMING CONDITION PARAMETER VALUE UNIT MIN MAX Output Condition CLOAD Output load capacitance(1) 10 pF (1) Buffer strength configuration: LB0 = 1 Table 6-36. DSS Switching Characteristics —TFT Mode(4) NO. PARAMETER OPP100 OPP50 UNIT MIN MAX MIN MAX DL0 td(pclkA-hsync) Delay time, output pixel clock dss_pclk active edge to –4.215 4.215 –4.658 4.658 ns output horizontal synchronization dss_hsync transition DL1 td(pclkA-vsync) Delay time, output pixel clock dss_pclk active edge to –4.215 4.215 –4.658 4.658 ns output vertical synchronization dss_vsync transition Copyright © 2010–2011, Texas Instruments Incorporated Timing Requirements and Switching Characteristics 203 Submit Documentation Feedback Product Folder Link(s): AM3715 AM3703 |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |