| поискавой системы для электроныых деталей |
|
IXP45X датащи(PDF) 129 Page - Intel Corporation |
|
|
|||||||||||||||||||||||||||||
IXP45X датащи(HTML) 129 Page - Intel Corporation |
|
129 / 148 page ![]() Intel® IXP45X and Intel® IXP46X Product Line of Network Processors August 2006 Datasheet Document Number: 306261-004US 129 Datasheet—Intel® IXP45X and Intel® IXP46X Product Line of Network Processors Figure 35. Motorola* Multiplexed Mode Table 68. Motorola* Multiplexed Mode Values (Sheet 1 of 2) Symbol Parameter Min. Max. Units Notes Talepulse Pulse width of ALE (ADDR is valid at the rising edge of ALE) 1 4 Cycles 1, 7 Tale2addrhold Valid address hold time after from falling edge of ALE 1 1 Cycles 1, 2, 7 Tdval2valds Write data valid prior to EXP_MOT_DS_N falling edge 1 4 Cycles 3, 7 Tdspulse Pulse width of the EXP_MOT_DS_N 1 16 Cycles 4, 7 Tdholdafterds Valid data after the rising edge of EXP_MOT_DS_N 1 4 Cycles 5, 7 Notes: 1. The EX_ALE signal is extended form T to 4T nnsec, based on the programming of the T1 timing parameter. The parameter Tale2addrhold is fixed at T. 2. Setting the address phase parameter (T1) will adjust the duration that the address appears to the external device. 3. Setting the data setup phase parameter (T2) will adjust the duration that the data appears prior to a data strobe (read or write) to an external device. 4. Setting the data strobe phase parameter (T3) will adjust the duration that the data strobe appears (read or write) to an external device. Data will be available during this time as well. 5. Setting the data hold strobe phase parameter (T4) will adjust the duration that the chip selects, address, and data (during a write) will be held. 6. Setting the recovery phase parameter (T5) will adjust the duration between successive accesses on the expansion interface. 7. T is the period of the clock measured in ns. 8. Clock to output delay for all signals will be a maximum of 15 ns for devices requiring operation in synchronous mode. 9. Timing was designed for a system load between 5pF and 60pF for high drive setting A9587-01 EX_CLK EX_ADDR EX_DATA EX_RD_N (exp_mot_rnw) EX_WR_N (exp_mot_ds_n) EX_DATA EX_ALE Valid Address T5 1-16 Cycles T4 1-4 Cycles EX_CS_N Trecov Tale2addrhold Tdval2valds EX_WR_N (exp_mot_ds_n) EX_RD_N (exp_mot_rnw) Tdhold2afterds T3 1-16 Cycles T2 1-4 Cycles T1 2-5 Cycles ALE Extended Talepulse Tale2valcs Tdspulse Address Output Data Address Input Data Multiplexed Address/Data Trdsetup Trdhold |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |