XIO2001 datasheet(37/128 Pages) TI

37 / 128 page

XIO2001

www.ti.com

SCPS212D – MAY 2009 – REVISED JANUARY 2010

Figure 3-17. Serial-Bus Protocol – Byte Read

Figure 3-18 illustrates the serial interface protocol during a multi-byte serial EEPROM download. The

serial-bus protocol starts exactly the same as a 1-byte read. The only difference is that multiple data bytes

are transferred. The number of transferred data bytes is controlled by the bridge master. After each data

byte, the bridge master issues acknowledge (logic low) if more data bytes are requested. The transfer

ends after a bridge master no acknowledge (logic high) followed by a stop condition.

Figure 3-18. Serial-Bus Protocol – Multibyte Read

Bit 7 (PROT_SEL) in the serial-bus control and status register changes the serial-bus protocol. Each of

the three previous serial-bus protocol figures illustrates the PROT_SEL bit default (logic low). When this

control bit is asserted, the word address and corresponding acknowledge are removed from the serial-bus

protocol. This feature allows the system designer a second serial-bus protocol option when selecting

external EEPROM devices.

3.10.3 Serial-Bus EEPROM Application

The registers and corresponding bits that are loaded through the EEPROM are provided in Table 3-8.

Table 3-8. EEPROM Register Loading Map

SERIAL EEPROM WORD

BYTE DESCRIPTION

ADDRESS

00h

PCI-Express to PCI bridge function indicator (00h)

01h

Number of bytes to download (25h)

02h

PCI 44h, subsystem vendor ID, byte 0

03h

PCI 45h, subsystem vendor ID, byte 1

04h

PCI 46h, subsystem ID, byte 0s

05h

PCI 47h, subsystem ID, byte 1s

06h

PCI D4h, general control, byte 0

Feature/Protocol Descriptions

Submit Documentation Feedback

Product Folder Link(s): XIO2001

XIO2001 датащи(PDF) 37 Page - Texas Instruments