WM8580 datasheet(49/103 Pages) WOLFSON

49 / 103 page

Production Data

WM8580

PD Rev 4.5 February 2008

PRIMARY AUDIO INTERFACE TRANSMITTER (PAIF TX)

The PAIF transmitter requires a left-right-clock (LRCLK) and a bit-clock (BCLK). These can be

supplied externally (slave mode) or they can be generated internally by the WM8580 (master mode).

In Slave mode, the BCLK driving the PAIF Tx interface is either the PAIFTX_BCLK pin (default) or

the PAIFRX_BCLK pin (if ADC is using MCLK pin). The LRCLK driving the PAIF Tx interface is the

PAIFRX_LRCLK

In master mode the BCLK and LRCLK driving the PAIF Tx interface are generated by the Master

Mode Clock Gen module. The control of this module is described on page 22.

The clock supplied to the Master Mode Clock Gen module can be ADCMCLK, PLLACLK, PLLBCLK,

or MCLK. Selection is automatic and is based on the digital routing configuration. Figure 30 illustrates

the clock configuration and Table 41 gives some examples of clock routing based on digital routing

configuration.

Figure 30 PAIF Tx Interface Clock Configuration

Digital Routing

Configuration

Clock used by PAIF Tx

Master Mode Clock

Generator

Comments

PAIF Tx = S/PDIF RX

PLLACLK

Recommend to operate PAIF Tx in master

mode

PAIF Tx = SAIF RX

Same as ADC_CLK

PAIF Tx selects the same as ADC_CLK_I

Table 41 PAIF Tx Clock Configuration Examples

Secondary Audio Interfaces (SAIF Rx & SAIF TX)

The SAIF Transmit and Receive interfaces share a common LRCLK and a common BCLK. These

can be supplied externally (slave mode) or they can be generated internally by the WM8580 (master

mode). Register R11, bit 5 selects master or slave mode.

In Slave mode, the BCLK driving the SAIF interface is the SAIF_BCLK pin and the LRCLK driving the

SAIF interface is the SAIF_LRCLK pin

WM8580 датащи(PDF) 49 Page - Wolfson Microelectronics plc