IMXRT1160AXEC datasheet(76/130 Pages) NXP

76 / 130 page

i.MX RT1160 Crossover Processors Data Sheet for Extended Industrial Products, Rev. 4, 06/2025

NXP Semiconductors

Electrical characteristics

4.6.3

LCD Controller timing parameters

Figure 32 shows the LCD timing and Table 72 lists the timing parameters.

Figure 32. LCD timing

4.7

Audio

This section provides information about SAI/I2S.

4.7.1

SAI/I2S switching specifications

This section provides the AC timings for the SAI in master (clocks driven) and slave (clocks input) modes.

All timings are given for non-inverted serial clock polarity (SAI_TCR[TSCKP] = 0, SAI_RCR[RSCKP]

= 0) and non-inverted frame sync (SAI_TCR[TFSI] = 0, SAI_RCR[RFSI] = 0). If the polarity of the clock

and/or the frame sync have been inverted, all the timings remain valid by inverting the clock signal

(SAI_BCLK) and/or the frame sync (SAI_FS) shown in the figures below.

Table 72. LCD timing parameters

Parameter

Symbol

Min

Max

Unit

LCD pixel clock frequency

tCLK(LCD)

—

75/1501

1 For eLCDIF or LCDIFv2, the maximum pixel clock frequency of parallel IO interface is 75 MHz, while it is 150 MHz for MIPI

DSI interface.

MHz

LCD pixel clock high (falling edge capture)

tCLKH(LCD)

—

LCD pixel clock low (rising edge capture)

tCLKL(LCD)

—

LCD pixel clock high to data valid (falling edge capture)

td(CLKH-DV)

-1

LCD pixel clock low to data valid (rising edge capture)

td(CLKL-DV)

-1

LCD pixel clock high to control signal valid (falling edge capture)

td(CLKH-CTRLV)

-1

LCD pixel clock low to control signal valid (rising edge capture)

td(CLKL-CTRLV)

-1

LCDn_CLK

(falling edge capture)

LCDn_CLK

(rising edge capture)

LCDn_DATA[23:00]

LCDn Control Signals

IMXRT1160AXEC датащи(PDF) 76 Page - NXP Semiconductors

IMXRT1160AXEC датащи(HTML) 76 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL