| поискавой системы для электроныых деталей |
|
STAC9752 датащи(PDF) 73 Page - Integrated Device Technology |
|
|
|||||||||||||||||||||||||||||
STAC9752 датащи(HTML) 73 Page - Integrated Device Technology |
|
73 / 95 page ![]() STAC9752/9753 TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH HEADPHONE DRIVE, SPDIF OUTPUT MICROPHONE & JACK SENSING IDT™ 73 STAC9752/9753 REV 3.3 1206 TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH HEADPHONE DRIVE, SPDIF OUTPUT MICROPHONE & JACK SENSING 8.4.6. Digital Audio Control (6Ah, Page 00h) To access Register 6Ah, Page 00h must be selected in Register 24h. 4 1 IV Information Valid Bit: Indicates whether a sensing method is provided by the CODEC and if information field is valid. This field is updated by the CODEC. 0 - After CODEC RESET# de-assertion, it indicates the CODEC does NOT provides sensing logic and this bit will be Read Only. After a sense cycle is completed, indicates that no information is provided on the sensing method. 1 - After CODEC RESET# de-assertion, it indicates the CODEC provides sensing logic for this I/O and this bit is Read/Write. After clearing this bit by writing 1, when a sense cycle is completed the assertion of this bit indicates that there is valid information in the remaining descriptor bits. Writing 0 to this bit has no effect. BIOS should NOT write this bit, as it is reset on RESET#. 3-1 0 RESERVED Bits not used, should read back 0 0 NA FIP Function Information Present This bit set to a 1 indicates that the G[4:0], INV, DL[4:0] (Register 68h, Page 01h) and ST[2:0] (register 6Ah, Page 01h) are supported and R/W capable. This bit is Read Only. Table 22. Reg 68h Default Values Reg 66h Function Code Reg 68h Default Value 00h Line Out 0010h 01h Headphone Out 0010h 05h Mic1 0010h 06h Mic2 0010h All other Function Codes 0000h For RESET#: Reg 68h default value is 0000h. Table 23. Gain or Attenuation Examples G[4:0] Gain or Attenuation (dB relative to level-out) 00000 0 dBV 00001 +1.5 dBV 01111 +24 dBV 10001 -1.5 dBV 11111 -24 dBV Table 24. Register 68h/Page 01h Bit Overview Bit Bit R/W Overview D15:D5 Read/Write and only reset on POR (Power on Reset) and not by RESET#. D4 Read/Write and should NOT be set by the BIOS D3:1 Reserved D0 Read Only. Bit(s) Reset Value Name Description |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |