| поискавой системы для электроныых деталей |
|
SZF2002 датащи(PDF) 35 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
SZF2002 датащи(HTML) 35 Page - NXP Semiconductors |
|
35 / 76 page ![]() 1998 Aug 26 35 Philips Semiconductors Product specification Low voltage 8-bit microcontroller with 6-kbyte embedded RAM SZF2002 17.2 Serial Port Control and Status Register (S0CON) The Serial Port Control and Status Register is the Special Function Register S0CON. The register contains not only the mode selection bits, but also the 9th data bit for transmit and receive (TB8 and RB8), and the serial port interrupt bits (TI and RI). Table 33 Serial Port Control Register (SFR address 98H) Table 34 Description of S0CON bits Table 35 Selection of the serial port modes 76543210 SMO SM1 SM2 REN TB8 RB8 TI RI BIT SYMBOL DESCRIPTION 7 SM0 Mode select. These 2 bits are used to select the serial port mode; see Table 35. 6 SM1 5 SM2 Enables the multiprocessor communication feature in Modes 2 and 3. In these modes, if SM2 = 1, then RI will not be activated if the received 9th data bit (RB8) is a logic 0. In Mode 1, if SM2 = 1, then RI will not be activated unless a valid stop bit was received. In Mode 0, SM2 should be a logic 0. 4 REN Enable serial reception. REN is set by software to enable reception, and cleared by software to disable reception. 3 TB8 Is the 9th data bit that will be transmitted in Modes 2 and 3. Set or cleared by software as desired. 2 RB8 In Modes 2 and 3, is the 9th data bit received. In Mode 1, if SM2 = 0, then RB8 is the stop bit that was received. In Mode 0, RB8 is not used. 1TI Transmit interrupt flag. Set by hardware at the end of the 8th bit time in Mode 0, or at the beginning of the stop bit time in the other modes, in any serial transmission. Must be cleared by software. 0RI Receive interrupt flag. Set by hardware at the end of the 8th bit time in Mode 0, or halfway through the stop bit time in the other modes, in any serial transmission (except see SM2). Must be cleared by software. SMO SM1 MODE DESCRIPTION BAUD RATE 0 0 Mode 0 shift register 1 ⁄6fclk 0 1 Mode 1 8-bit UART variable 1 0 Mode 2 9-bit UART 1 ⁄16fclk or 1⁄32fclk 1 1 Mode 3 9-bit UART variable |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |