| поискавой системы для электроныых деталей |
|
AM29LV640MH датащи(PDF) 12 Page - Advanced Micro Devices |
|
|
|||||||||||||||||||||||||||||
AM29LV640MH датащи(HTML) 12 Page - Advanced Micro Devices |
|
12 / 62 page ![]() 10 Am29LV640MH/L December 14, 2005 DA TA SH EET DEVICE BUS OPERATIONS This section describes the requirements and use of the device bus operations, which are initiated through the internal command register. The command register itself does not occupy any addressable memory loca- tion. The register is a latch used to store the com- mands, along with the address and data information needed to execute the command. The contents of the register serve as inputs to the internal state machine. The state machine outputs dictate the function of the device. Table 1 lists the device bus operations, the in- puts and control levels they require, and the resulting output. The following subsections describe each of these operations in further detail. Table 1. Device Bus Operations Legend: L = Logic Low = V IL, H = Logic High = VIH, VID = 11.5–12.5 V, VHH = 11.5–12.5 V, X = Don’t Care, SA = Sector Address, A IN = Address In, DIN = Data In, DOUT = Data Out Notes: 1. Addresses are A21:A0 in word mode; A21:A-1 in byte mode. Sector addresses are A21:A15 in both modes. 2. The sector protect and sector unprotect functions may also be implemented via programming equipment. See the “Sector Group Protection and Unprotection” section. 3. If WP# = V IL, the first or last sector remains protected. If WP# = V IH, the first or last sector will be protected or unprotected as determined by the method described in “Sector Group Protection and Unprotection”. All sectors are unprotected when shipped from the factory (The SecSi Sector may be factory protected depending on version ordered.) 4. D IN or DOUT as required by command sequence, data polling, or sector protect algorithm (see Figure 2). Operation CE# OE# WE# RESET# WP# ACC Addresses (Note 2) DQ0– DQ7 DQ8–DQ15 BYTE# = V IH BYTE# = V IL Read L L H H X X A IN D OUT D OUT DQ8–DQ14 = High-Z, DQ15 = A-1 Write (Program/Erase) L H L H (Note 3) X A IN (Note 4) (Note 4) Accelerated Program L H L H (Note 3) V HH A IN (Note 4) (Note 4) Standby V CC ± 0.3 V XX V CC ± 0.3 V X H X High-Z High-Z High-Z Output Disable L H H H X X X High-Z High-Z High-Z Reset X X X L X X X High-Z High-Z High-Z Sector Group Protect (Note 2) LH L V ID HX SA, A6 =L, A3=L, A2=L, A1=H, A0=L (Note 4) X X Sector Group Unprotect (Note 2) LH L V ID HX SA, A6=H, A3=L, A2=L, A1=H, A0=L (Note 4) X X Temporary Sector Group Unprotect XX X V ID HX A IN (Note 4) (Note 4) High-Z |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |