AT43USB353M datasheet(93/95 Pages) ATMEL

номер детали	AT43USB353M

подробное описание детали	Low Cost Full-speed USB Microcontroller with Embedded Hub, ADC and PWM

PDF	95 Pages

Scroll/Zoom	100%

производитель	ATMEL [ATMEL Corporation]

домашняя страница	http://www.atmel.com

Logo

93 / 95 page

AT43USB353M

3307B–USB–4/04

Errata Sheet

Errata (All Date Codes): Missed Watchdog Timer Reset

Problem

There is a synchronization problem between the watchdog clock and the AVR clock. Even

though the clock inputs to both the watchdog timer and the AVR core are generated through

the same crystal, the two clock sources are not going through the same PLL. The AVR is

clocked at 12 MHz and the watchdog timer is clocked at 1MHz. The WDR (Watchdog Reset)

instruction is a one-clock-cycle instruction. As such, when a watchdog timer reset occurs due

to a WDR, the watchdog timer may miss the reset. This happens frequently if the AVR is

clocked much faster than the watchdog timer.

Fix/Workaround

A workaround is to invoke the WDR repetitively to ensure that the watchdog timer will be able

to receive the reset signal.

If the AVR runs at 12 MHz, the WDR command must be invoked

fourteen times back to back.

The following is the sample code for resetting and arming the watchdog timer, assuming the

AVR is running at 12 MHz:

asm ( "ldi r16,15\n WDR\n WDR\n WDR\n WDR\n WDR\n WDR\n WDR\n WDR\n WDR\n

WDR\n WDR\n WDR\n WDR\n out 0x21,r16 " );

To disarm and disable the watchdog, do the following:

asm ( "ldi r16,0x18\nldi r17,0x10\n\n out 0x21,r16\n out 0x21,r17 " );

Please note that if the AVR runs at 24 MHz, the WDR should be invoked twenty-six times.

AT43USB353M датащи(PDF) 93 Page - ATMEL Corporation