ADPD4200 datasheet(9/93 Pages) AD

9 / 93 page

Data Sheet

ADPD4200

ABSOLUTE MAXIMUM RATINGS

analog.com

Rev. 0 | 9 of 93

Table 8.

Parameter

Rating

AVDD to AGND

−0.3 V to +2.2 V

DVDD1 to DGND

−0.3 V to +2.2 V

IOVDD to DGND

−0.3 V to +3.9 V

GPIOx, MOSI, MISO, SCLK, CS

−0.3 V to +3.9 V

LEDxx to LGND

−0.3 V to +3.9 V

Junction Temperature

150°C

Stresses at or above those listed under Absolute Maximum Ratings

may cause permanent damage to the product. This is a stress

rating only; functional operation of the product at these or any other

conditions above those indicated in the operational section of this

specification is not implied. Operation beyond the maximum operat-

ing conditions for extended periods may affect product reliability.

THERMAL RESISTANCE

Thermal performance is directly linked to printed circuit board

(PCB) design and operating environment. Close attention to PCB

thermal design is required.

θJA is the natural convection junction to ambient thermal resistance

measured in a one cubic foot sealed enclosure. θJC is the junction

to case thermal resistance.

Table 9. Thermal Resistance

Package Type1

θJA

θJC

Unit

CB-24-5

1.154

°C/W

1 The thermal resistance values are defined as per the JESD51-12 standard.

RECOMMENDED SOLDERING PROFILE

Figure 3. Recommended Soldering Profile

Table 10.

Profile Feature

Condition (Pb-Free)

Average Ramp Rate (TL to TP)

3°C/sec maximum

Preheat

Minimum Temperature (TSMIN)

150°C

Maximum Temperature (TSMAX)

200°C

Time (TSMIN to TSMAX) (tS)

60 sec to 180 sec

TSMAX to TL Ramp-Up Rate

3°C/sec maximum

Time Maintained Above Liquidous

Temperature

Table 10.

Profile Feature

Condition (Pb-Free)

Liquidous Temperature (TL)

217°C

Time (tL)

60 sec to 150 sec

Peak Temperature (TP)

+260 (+0/−5)°C

Time Within 5°C of Actual Peak

Temperature (tP)

<30 sec

Ramp-Down Rate

6°C/sec maximum

Time from 25°C to Peak Temperature

8 minutes maximum

ELECTROSTATIC DISCHARGE (ESD) RATINGS

The following ESD information is provided for handling of ESD

sensitive devices in an ESD protected area only.

Human body model (HBM) per ANSI/ESDA/JEDEC JS-001 and

charged device model (CDM) per ANSI/ESDA/JEDEC JS-002.

ESD Ratings for ADPD4200

Table 11. ADPD4200, 24-Ball WLCSP

ESD Model

Withstand Threshold (V)

Class

HBM

2500

CDM

1250

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Charged devi-

ces and circuit boards can discharge without detection. Although

this product features patented or proprietary protection circuitry,

damage may occur on devices subjected to high energy ESD.

Therefore, proper ESD precautions should be taken to avoid

performance degradation or loss of functionality.

ADPD4200 датащи(PDF) 9 Page - Analog Devices

ADPD4200 датащи(HTML) 9 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93

датащи скачать

ссылки URL