| поискавой системы для электроныых деталей |
|
STM32G0 датащи(PDF) 29 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32G0 датащи(HTML) 29 Page - STMicroelectronics |
|
29 / 135 page ![]() DS12232 Rev 4 29/135 STM32G071x8/xB Functional overview 35 3.18.2 General-purpose timers (TIM2, 3, 14, 15, 16, 17) There are six synchronizable general-purpose timers embedded in the device (refer to Table 7 for comparison). Each general-purpose timer can be used to generate PWM outputs or act as a simple timebase. • TIM2, TIM3 These are full-featured general-purpose timers: – TIM2 with 32-bit auto-reload up/downcounter and 16-bit prescaler – TIM3 with 16-bit auto-reload up/downcounter and 16-bit prescaler They have four independent channels for input capture/output compare, PWM or one- pulse mode output. They can operate together or in combination with other general- purpose timers via the Timer Link feature for synchronization or event chaining. They can generate independent DMA request and support quadrature encoders. Their counters can be frozen in debug mode. • TIM14 This timer is based on a 16-bit auto-reload upcounter and a 16-bit prescaler. It has one channel for input capture/output compare, PWM output or one-pulse mode output. Its counter can be frozen in debug mode. • TIM15, TIM16, TIM17 These are general-purpose timers featuring: – 16-bit auto-reload upcounter and 16-bit prescaler – 2 channels and 1 complementary channel for TIM15 – 1 channel and 1 complementary channel for TIM16 and TIM17 All channels can be used for input capture/output compare, PWM or one-pulse mode output. The timers can operate together via the Timer Link feature for synchronization or event chaining. They can generate independent DMA request. Their counters can be frozen in debug mode. 3.18.3 Basic timers (TIM6 and TIM7) 3.18.4 Low-power timers (LPTIM1 and LPTIM2) These timers have an independent clock. When fed with LSE, LSI or external clock, they keep running in Stop mode and they can wake up the system from it. These timers are mainly used for triggering DAC conversions. They can also be used as generic 16-bit timebases. |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |