MMPF0200Z datasheet(75/118 Pages) NXP

75 / 118 page

Analog Integrated Circuit Device Data



Freescale Semiconductor

PF0200Z

Functional Block Requirements and Behaviors

Power Generation

VGEN2 AC AND TRANSIENT (CONTINUED)

Turn-Off Time

Disable to 10% of initial value, VIN1 = 1.75 V

IGEN2 = 0.0 mA

GEN2tOFF

––

Start-up Overshoot

VIN1 = 1.75 V, 3.4 V, IGEN2 = 0.0 mA

GEN2OSHT

–1.0

2.0

Transient Load Response

VIN1 = 1.75 V, 3.4 V

IGEN2 = 25 to 250 mA in 1.0 s

Peak of overshoot or undershoot of VGEN2 with respect to final

value

Refer to Figure 20

VGEN2LOTR

––

3.0

Transient Line Response

IGEN2 = 187.5 mA

VIN1INITIAL = 1.75 V to VIN1FINAL = 2.25 V for 

VGEN2[3:0] = 0000 to 1101

VIN1INITIAL = VGEN2+0.3 V to VIN1FINAL = VGEN2+0.8 V for

VGEN2[3:0] = 1110, 1111

Refer to Figure 20

VGEN2LITR

–5.0

8.0

Notes

53.

The PSRR of the regulators is measured with the perturbing signal at the input of the regulator. The power management IC is supplied

separately from the input of the regulator and does not contain the perturbed signal. During measurements, care must be taken not to

operate in the dropout region of the regulator under test.

Table 87. VGEN2 Electrical Characteristics (continued)

All parameters are specified at TA = -40 to 85 °C, VIN = 3.6 V, VIN1 = 3.0 V, VGEN2[3:0] = 1111, IGEN2 = 10 mA, typical external

component values, unless otherwise noted. Typical values are characterized at VIN = 3.6V, VIN1 = 3.0 V, VGEN2[3:0] = 1111,

IGEN2 = 10mA and 25°C, unless otherwise noted.

Parameter

Symbol

Min

Typ

Max

Unit

MMPF0200Z датащи(PDF) 75 Page - NXP Semiconductors

MMPF0200Z датащи(HTML) 75 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL