 |
поискавой системы для электроныых деталей |
|
|
поискавой системы для электроныых деталей |
|
SSD1963QL9R датащи(PDF) 21 Page - List of Unclassifed Manufacturers |
|
|
|||||||||||||||||||||||||||||
SSD1963QL9R датащи(HTML) 21 Page - List of Unclassifed Manufacturers |
|
|
21 / 93 page  SSD1963 Rev 1.1 P 21/93 Jan 2010 Solomon Systech 8 COMMAND TABLE Hex Code Command Description 0x00 nop No operation 0x01 soft_reset Software Reset 0x0A get_power_mode Get the current power mode 0x0B get_address_mode Get the frame buffer to the display panel read order 0x0C Reserved Reserved 0x0D get_display_mode The SSD1963 returns the Display Image Mode. 0x0E get_tear_effect_status Get the Tear Effect status 0x0F Reserved Reserved 0x10 enter_sleep_mode Turn off the panel. This command will pull low the GPIO0. If GPIO0 is configured as normal GPIO or LCD miscellaneous signal with command set_gpio_conf, this command will be ignored. 0x11 exit_sleep_mode Turn on the panel. This command will pull high the GPIO0. If GPIO0 is configured as normal GPIO or LCD miscellaneous signal with command set_gpio_conf, this command will be ignored. 0x12 enter_partial_mode Part of the display area is used for image display. 0x13 enter_normal_mode The whole display area is used for image display. 0x20 exit_invert_mode Displayed image colors are not inverted. 0x21 enter_invert_mode Displayed image colors are inverted. 0x26 set_gamma_curve Selects the gamma curve used by the display panel. 0x28 set_display_off Blanks the display panel 0x29 set_display_on Show the image on the display panel 0x2A set_column_address Set the column address 0x2B set_page_address Set the page address 0x2C write_memory_start Transfer image information from the host processor interface to the SSD1963 starting at the location provided by set_column_address and set_page_address 0x2E read_memory_start Transfer image data from the SSD1963 to the host processor interface starting at the location provided by set_column_address and set_page_address 0x30 set_partial_area Defines the partial display area on the display panel 0x33 set_scroll_area Defines the vertical scrolling and fixed area on display area 0x34 set_tear_off Synchronization information is not sent from the SSD1963 to the host processor 0x35 set_tear_on Synchronization information is sent from the SSD1963 to the host processor at the start of VFP 0x36 set_address_mode Set the read order from frame buffer to the display panel 0x37 set_scroll_start Defines the vertical scrolling starting point 0x38 exit_idle_mode Full color depth is used for the display panel 0x39 enter_idle_mode Reduce color depth is used on the display panel. 0x3A Reserved Reserved 0x3C write_memory_continue Transfer image information from the host processor interface to the SSD1963 from the last written location 0x3E read_memory_continue Read image data from the SSD1963 continuing after the last read_memory_continue or read_memory_start |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Russian ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
