EM78P568

8-bit OTP Micro-controller

__________________________________________________________________________________________________________________________________________________________________

* This specification are subject to be changed without notice.

6

01/31/2004

V4.7

VI. Pin Descriptions

PIN

I/O

DESCRIPTION

POWER

VDD

AVDD

POWER

Digital power

Analog power

VSS

AVSS

POWER

Digital ground

Analog ground

CLOCK

XIN

I

Input pin for 32.768 kHz oscillator

XOUT

O

Output pin for 32.768 kHz oscillator

PLLC

I

Phase loop lock capacitor, connect a capacitor 0.01u to 0.047u to the ground.

LCD

COM0 ~ COM3 O

Common driver pins of LCD drivers

SEG0 ~ SEG9

SEG10 ~ SEG12

SEG13 ~ SEG20

SEG21 ~ SEG28

SEG29 ~ SEG31

O

O (I/O : PORT5)

O (I/O : PORT9)

O (I/O : PORTB)

O (I/O : PORTC)

Segment driver pins of LCD drivers

SEG10 to SEG31 are shared with IO PORT.

Programming

tone generators

TONE

O

Programming single tone or dual tone output

Comparator

CMP1

CMP2

CMP3

I (P62)

I (P63)

I (P64)

Comparator input pins. Shared with PORT62, PORT634 and PORT64.

8-bit D/A

DAO

O (P67)

D/A converter output pin.

Shared with PORT67

CTCSS

MICO

O

Microphone amplifier output. Put a feedback resistor to adjust the gain

MICI

I

Microphone amplifier input

RXO

O

Receiver amplifier output. Put a feedback resistor to adjust the gain

RXI

I

Receiver amplifier input

AURX

O (P65)

Receiving audio output

Share with PORT65

MTX

O (P66)

Modulation transmission output for CTCSS tone

Shared with PORT66

IO

P55~P57

I/O

PORT5 can be INPUT or OUTPUT port each bit.

PORT5(7:5) are shared with LCD Segment signal.

P60 ~P67

I/O

PORT6 can be INPUT or OUTPUT port each bit.

P70 ~ P77

I/O

PORT7 can be INPUT or OUTPUT port each bit.

PORT7(4~6) are shared with SPI interface pins

Internal Pull high function.

PORT7(0~3) has interrupt function.