| поискавой системы для электроныых деталей |
|
HAL855 датащи(PDF) 16 Page - Micronas |
|
|
|||||||||||||||||||||||||||||
HAL855 датащи(HTML) 16 Page - Micronas |
|
16 / 102 page ![]() HAL8xy, HAL100x APPLICATION NOTE Programmer Board 16 Sept. 19, 2013; APN000046_03EN Micronas 3.4.1. Firmware Update The HAL Programmer V5.1 is equipped with a flash-memory. Thus, firmware-upgrades can be done easily by flashing the new firmware into this memory. For this purpose the software-tool-kit ‘FLASH IT’ is provided. 1. Unzip the package ‘Flashit.zip’ into a suitable working directory. When unzipping with ‘WinZip’ a sub-folder ‘\Flashit’ will be generated. 2. Close the jumper ‘BOOT’ beneath the ‘Reset’-button of the HAL Programmer Board. 3. Push the ‘Reset’-button. 4. Open the jumper ‘BOOT’ again. 5. Start the executable ‘Bootload.exe’ by double-clicking the icon in \Flashit. 6. After hitting the icon, the flash process starts. Fig. 3–2: Flash procedure Note: The flash process lasts for about 10 – 15 min. After the process has finished, the board will be reset automatically and the new firmware will start working. Note: The firmware to be loaded into the flash-memory is called ‘HALFLASH.H86’. It must be stored in the same folder where the executable is located. |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |