HAL855 datasheet(86/102 Pages) MICRONAS

86 / 102 page

HAL8xy, HAL100x

APPLICATION NOTE

Programmer Board

Sept. 19, 2013; APN000046_03EN

Micronas

Examples:

(Blanks are given for better readability only)

– set board operation mode:

STX j 3 ETX

–power on:

STX n ETX

– set bit time slow CHR$(85) = ’U’:

STX z U ETX

– read register no. 2:

STX q 0 1 2 1 ETX

– write register no. 2:

STX e 3 1 2 1 0 0 0 A 1 ETX

– write output characteristic setpoint 0:

STX e 1 0 0 0 0 0 0 0 1 ETX

– write output characteristic setpoint 16:

STX e 2 0 0 0 0 1 0 0 0 ETX

– read output characteristic setpoint 15:

STX e 6 1 f 0 ETX

– read output characteristic setpoint 31:

STX q 7 0 f 0 ETX

– store sequence:

STX u CHR$(100) ETX (set programming time)

STX y CHR$(11) ETX (set delay of Acknowledge)

STX c 5 1 3 0 4 0 3 0 6 1 0 0 ETX

(ERASE-PROM-READ)

– lock sensors

STX e 3 1 6 0 0 0 0 1 0 ETX (set Lock bit)

STX u CHR$(100) ETX (set programming time)

STX y CHR$(11) ETX (set delay of Acknowledge)

STX k 4 0 6 0 0 1 3 0 ETX (PROM-READ)

7.2.1.

Monitoring of the Supply Voltage

In case of ERASE, PROM, and LOCK, the supply voltage is measured by the board,

and a data string is sent back to the PC. The relation between the data and the supply

voltage is

If the supply voltage is out of the specification limits, the status bit is set to “1”.

Examples:

–VPROG = 4.80 V, Data board  PC:

STX 1 0 5 2 6 0 ETX

(DAT = 0 5 2 6)

–VPROG = 5.00 V, Data board  PC:

STX 0 0 5 5 D 0 ETX

(DAT = 0 5 5 D)

PROG

DAT

4095

------------ 6 2.485 V



HAL855 датащи(PDF) 86 Page - Micronas

HAL855 датащи(HTML) 86 Page - Micronas

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL