| поискавой системы для электроныых деталей |
|
FREQ датащи(PDF) 20 Page - fujitsu semiconductor |
|
|
|||||||||||||||||||||||||||||
FREQ датащи(HTML) 20 Page - fujitsu semiconductor |
|
20 / 56 page ![]() 20 MB39A214A Limitation : development tool vendor use only FUJITSU SEMICONDUCTOR CONFIDENTIAL DS405-00007-1v0-E (10) Over Temperature Protection (OTP) The over-temperature protection circuit block (OTP) provides a function that prevents the IC from a thermal destruction. If the junction temperature reaches + 150 °C, the DRVH1 pin (pin 24) and DRVH2 pin (pin 13) are set to the “L” level, and the DRVL1 pin (pin 22 ) and DRVL2 pin (pin 15) are set to the “L” level. This fixes the high-side and low-side FETs to the off-state, of both channels in the DC/DC converter, causing switching to be stopped. The discharge operation is then carried out to discharge the output capacitor (The discharge operation continues until the state of the over-temperature protection is released). If the junction temperature drops to + 125 °C, the soft start is reactivated. (Restored automatically.) (11) Operation mode In the PWM-fixed mode, the system acts by the switching frequency specified with the FREQ pin regardless of the load. In the automatic PFM/PWM selection mode, the switching frequency is reduced at low load, for enhancing the conversion efficiency characteristics. This function detects 0 A of the inductor current from the electromotive force of the low-side FET ON resistance when the low-side FET ON state, and places the low-side FET into the off state. This idle period continued until the output voltage decreased, this results the switching frequency being reduced automatically depending on the load current when the inductor current is below the critical current. The system acts by the switching frequency specified with the FREQ pin, when the inductor current exceeds the critical current. For Automatic PFM/PWM selection mode with PAF function, the switching frequency at low load is held to 30 kHz (Min) or more. The operation mode can be switched by setting the MODE pin (pin 17) to any one of GND connection, OPEN, and VB connection. PWM-fixed mode IOUTx ILXx VLXx 0 A Automatic PFM/PWM selection mode IOUTx ILXx VLXx 0 A Switching frequency reduced Inductor current in the opposite direction X : Each channel number |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |