P89LPC932 datasheet(26/60 Pages) PHILIPS

26 / 60 page

Philips Semiconductors

P89LPC932

8-bit microcontroller with accelerated two-clock 80C51 core

Product data

Rev. 04 — 06 January 2004

26 of 60

9397 750 12379

8.16 Timers/counters 0 and 1

The P89LPC932 has two general purpose counter/timers which are upward

compatible with the standard 80C51 Timer 0 and Timer 1. Both can be conﬁgured to

operate either as timers or event counter. An option to automatically toggle the T0

and/or T1 pins upon timer overﬂow has been added.

In the ‘Timer’ function, the register is incremented every machine cycle.

In the ‘Counter’ function, the register is incremented in response to a 1-to-0 transition

at its corresponding external input pin, T0 or T1. In this function, the external input is

sampled once during every machine cycle.

Timer 0 and Timer 1 have ﬁve operating modes (modes 0, 1, 2, 3 and 6). Modes 0, 1,

2 and 6 are the same for both Timers/Counters. Mode 3 is different.

8.16.1

Mode 0

Putting either Timer into Mode 0 makes it look like an 8048 Timer, which is an 8-bit

Counter with a divide-by-32 prescaler. In this mode, the Timer register is conﬁgured

as a 13-bit register. Mode 0 operation is the same for Timer 0 and Timer 1.

8.16.2

Mode 1

Mode 1 is the same as Mode 0, except that all 16 bits of the timer register are used.

8.16.3

Mode 2

Mode 2 conﬁgures the Timer register as an 8-bit Counter with automatic reload.

Mode 2 operation is the same for Timer 0 and Timer 1.

8.16.4

Mode 3

When Timer 1 is in Mode 3 it is stopped. Timer 0 in Mode 3 forms two separate 8-bit

counters and is provided for applications that require an extra 8-bit timer. When

Timer 1 is in Mode 3 it can still be used by the serial port as a baud rate generator.

8.16.5

Mode 6

In this mode, the corresponding timer can be changed to a PWM with a full period of

256 timer clocks.

8.16.6

Timer overﬂow toggle output

Timers 0 and 1 can be conﬁgured to automatically toggle a port output whenever a

timer overﬂow occurs. The same device pins that are used for the T0 and T1 count

inputs are also used for the timer toggle outputs. The port outputs will be a logic 1

prior to the ﬁrst timer overﬂow when this mode is turned on.

P89LPC932 датащи(PDF) 26 Page - NXP Semiconductors

P89LPC932 датащи(HTML) 26 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

датащи скачать

ссылки URL