P89LPC932 datasheet(17/60 Pages) PHILIPS

17 / 60 page

Philips Semiconductors

P89LPC932

8-bit microcontroller with accelerated two-clock 80C51 core

Product data

Rev. 04 — 06 January 2004

17 of 60

9397 750 12379

Functional description

Remark: Please refer to the

P89LPC932 User’s Manual for a more detailed

functional description.

8.1 Enhanced CPU

The P89LPC932 uses an enhanced 80C51 CPU which runs at 6 times the speed of

standard 80C51 devices. A machine cycle consists of two CPU clock cycles, and

most instructions execute in one or two machine cycles.

8.2 Clocks

8.2.1

Clock deﬁnitions

The P89LPC932 device has several internal clocks as deﬁned below:

OSCCLK — Input to the DIVM clock divider. OSCCLK is selected from one of four

clock sources (see Figure 6) and can also be optionally divided to a slower frequency

(see Section 8.7 “CPU Clock (CCLK) modiﬁcation: DIVM register”).

Note: fOSC is deﬁned as the OSCCLK frequency.

CCLK — CPU clock; output of the clock divider. There are two CCLK cycles per

machine cycle, and most instructions are executed in one to two machine cycles (two

or four CCLK cycles).

RCCLK — The internal 7.373 MHz RC oscillator output.

PCLK — Clock for the various peripheral devices and is CCLK

⁄

8.2.2

CPU clock (OSCCLK)

The P89LPC932 provides several user-selectable oscillator options in generating the

CPU clock. This allows optimization for a range of needs from high precision to lowest

possible cost. These options are conﬁgured when the FLASH is programmed and

include an on-chip watchdog oscillator, an on-chip RC oscillator, an oscillator using

an external crystal, or an external clock source. The crystal oscillator can be

optimized for low, medium, or high frequency crystals covering a range from 20 kHz

to 12 MHz.

8.2.3

Low speed oscillator option

This option supports an external crystal in the range of 20 kHz to 100 kHz. Ceramic

resonators are also supported in this conﬁguration.

8.2.4

Medium speed oscillator option

This option supports an external crystal in the range of 100 kHz to 4 MHz. Ceramic

resonators are also supported in this conﬁguration.

8.2.5

High speed oscillator option

This option supports an external crystal in the range of 4 MHz to 12 MHz. Ceramic

resonators are also supported in this conﬁguration.

P89LPC932 датащи(PDF) 17 Page - NXP Semiconductors

P89LPC932 датащи(HTML) 17 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

датащи скачать

ссылки URL