MPC8349EVVALDB datasheet(46/87 Pages) FREESCALE

46 / 87 page

MPC8349EA PowerQUICC II Pro Integrated Host Processor Hardware Specifications, Rev. 13

Freescale Semiconductor

I2C

Figure 32 provides the AC test load for the I2C.

Figure 32. I2C AC Test Load

Figure 33 shows the AC timing diagram for the I2C bus.

Figure 33. I2C Bus AC Timing Diagram

Fall time of both SDA and SCL signals5

tI2CF

300

Setup time for STOP condition

tI2PVKH

0.6

—

μs

Bus free time between a STOP and START condition

tI2KHDX

1.3

—

μs

Noise margin at the LOW level for each connected device (including

hysteresis)

VNL

0.1

× OV

—V

Noise margin at the HIGH level for each connected device (including

hysteresis)

VNH

0.2

× OV

—V

Notes:

1. The symbols for timing specifications follow the pattern of t(first two letters of functional block)(signal)(state)(reference)(state) for inputs

and t(first two letters of functional block)(reference)(state)(signal)(state) for outputs. For example, tI2DVKH symbolizes I

2C timing (I2) with

respect to the time data input signals (D) reach the valid state (V) relative to the tI2C clock reference (K) going to the high (H)

state or setup time. Also, tI2SXKL symbolizes I

2C timing (I2) for the time that the data with respect to the start condition (S)

goes invalid (X) relative to the tI2C clock reference (K) going to the low (L) state or hold time. Also, tI2PVKH symbolizes I

timing (I2) for the time that the data with respect to the stop condition (P) reaches the valid state (V) relative to the tI2C clock

reference (K) going to the high (H) state or setup time. For rise and fall times, the latter convention is used with the appropriate

letter: R (rise) or F (fall).

2. The device provides a hold time of at least 300 ns for the SDA signal (referred to the VIH(min) of the SCL signal) to bridge

the undefined region of the falling edge of SCL.

3. The maximum tI2DVKH must be met only if the device does not stretch the LOW period (tI2CL) of the SCL signal.

4. CB = capacitance of one bus line in pF.

5.)The device does not follow the “I2C-BUS Specifications” version 2.1 regarding the tI2CF AC parameter.

Table 43. I2C AC Electrical Specifications (continued)

Parameter

Symbol1

Min

Max

Unit

Output

Z0 = 50 Ω

OVDD/2

RL = 50 Ω

SDA

SCL

tI2CF

tI2SXKL

tI2CL

tI2CH

tI2DXKL

tI2DVKH

tI2SXKL

tI2SVKH

tI2KHKL

tI2PVKH

tI2CR

tI2CF

MPC8349EVVALDB датащи(PDF) 46 Page - Freescale Semiconductor, Inc

MPC8349EVVALDB датащи(HTML) 46 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87

датащи скачать

ссылки URL