TFP410-EP

PanelBus

™ DIGITAL TRANSMITTER

SGLS344A − JULY 2006 − REVISED MAY 2011

1

POST OFFICE BOX 655303

− One Assembly

− One Test Site

− One Fabrication Site

−55°C to 125°C

Sources (DMS) Support

(Including 1080p and WUXGA at 60Hz)

− 12-Bit Dual-Edge and 24-Bit Single-Edge

Input Modes

− Adjustable 1.1-V to 1.8-V and Standard

3.3-V CMOS Input Signal Levels

− Fully Differential and Single-Ended Input

Clocking Modes

− Standard Intelt 12-Bit Digital Video Port

Compatible as on Intel 81x Chipsets

− On-Chip Regulators and Bypass

Capacitors for Reducing System Costs

− No HSYNC Jitter Anomaly

− Negligible Data-Dependent Jitter

Receiver Detection

TI’s PowerPAD™ Package

Process Technology

standards to ensure reliable operation over an extended

temperature range. This includes, but is not limited to, Highly

Accelerated Stress Test (HAST) or biased 85/85, temperature

cycle, autoclave or unbiased HAST, electromigration, bond

intermetallic life, and mold compound life. Such qualification

testing should not be viewed as justifying use of this component

beyond specified performance and environmental limits.

description

The TFP410 is a Texas Instruments PanelBust flat panel display product, part of a comprehensive family of

end-to-end digital visual interface (DVI) 1.0-compliant solutions, targeted at the PC and consumer electronics

industry.

The TFP410 provides a universal interface to allow a glueless connection to most commonly available graphics

controllers. Some of the advantages of this universal interface include selectable bus widths, adjustable signal

levels, and differential and single-ended clocking. The adjustable 1.1-V to 1.8-V digital interface provides a

low-EMI, high-speed bus that connects seamlessly with 12-bit or 24-bit interfaces. The DVI interface supports

flat panel display resolutions up to UXGA at 165 MHz in 24-bit true color pixel format.

The TFP410 combines PanelBus circuit innovation with TI advanced 0.18-μm EPIC-5 CMOS process

technology and ultralow ground inductance PowerPADt package. The result is a compact 64-pin thin quad flat

pack (TQFP) package providing a reliable, low-current, low-noise, high-speed digital interface solution.

ORDERING INFORMATION

ORDERABLE

PART NUMBER

TOP-SIDE

MARKING

−55°C to 125°C

PAP − TQFP

Tape and reel

TFP410MPAPREP

TFP410MEP

guidelines are available at www.ti.com/sc/package.

Copyright © 2006 − 2011, Texas Instruments Incorporated

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

1. The digital visual interface (DVI) specification is an industry standard developed by the digital display working group (DDWG) for high-speed

digital connection to digital displays and has been adopted by industry-leading PC and consumer electronics manufacturers. The TFP410

is compliant to the DVI Revision 1.0 specification.

PanelBus, PowerPAD, and EPIC-5 are trademarks of Texas Instruments.

VESA is a trademark of Video Electronics Standards Association.

Intel is a trademark of Intel Corporation.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.