SH7018 datasheet(18/431 Pages) RENESAS

18 / 431 page

Table 1.1

Features

Item

Specification

CPU

• Original Hitachi architecture

• Internal 32-bit configuration

• General register machine

 General registers: 32-bit × 16

 Control registers: 32-bit × 3

 System registers: 32-bit × 4

• RISC (reduced instruction set computer) instruction set

 Instruction length: 16-bit fixed for efficient coding

 Load-store architecture (basic operations executed between

registers)

 Extended branching instructions to minimize pipeline disturbance

when branching

 Instruction set based on C language

• Instruction execution time of one cycle per instruction (50 ns per

instruction when operating at 20 MHz)

• Maximum address space of 4 GB supported by architecture

• On-chip multiplier

The on-chip multiplier handles 32

× 32 → 64 multiplication

operations in two to four cycles and 32

× 32 + 64 → 64

multiplication/accumulation operations in two to four cycles.

• Pipeline

5-stage pipeline

Interrupt controller (INTC)

• Seven external interrupt pins (NMI, IRQ0 to IRQ3, IRQ6, IRQ7)

• 16-level priority setting supported

Bus state controller (BSC)

• Bus access to external memory and external devices supported

 8-bit fixed external data bus

• Address space divided into four areas (SRAM space × 4 areas)

Wait cycles may be specified (0 to 3 cycles) separately for each

area.

• Chip select signals corresponding to memory areas are output.

• Wait cycles may be inserted using external WAIT signal.

SH7018 датащи(PDF) 18 Page - Renesas Technology Corp