| поискавой системы для электроныых деталей |
|
VL53L8CH датащи(PDF) 35 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
VL53L8CH датащи(HTML) 35 Page - STMicroelectronics |
|
35 / 44 page ![]() 11 Packaging and labeling 11.1 Product marking See the figure below for the product marking area. The marking is L8A- Figure 33. Product marking area A 2D product marking code is applied on the corner of the module cap as shown in Figure 34. 2D marking product code. Note: The 2D marking code aligns with pin C7 of the module and is not an indicator of pin 1. Figure 34. 2D marking product code 11.2 Inner box labeling The labeling follows the Microelectronics' standard packing acceptance specification. The following information is on the inner box label: • Assembly site • Sales type • Quantity • Trace code • Marking • Bulk ID number 11.3 Packing At customer/subcontractor level, it is recommended to mount the VL53L8CH in a clean environment. To help avoid any foreign material contamination at final assembly level, the modules are shipped in a tape and reel format with a protective liner. The liner is compliant with reflow at 260°C (as per JEDEC-STD-020E). Note: The liner must be removed during assembly of the customer device, just before mounting the cover glass. VL53L8CH Packaging and labeling DS14310 - Rev 3 page 35/44 |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |