| поискавой системы для электроныых деталей |
|
JS28F320J3F75 датащи(PDF) 48 Page - Numonyx B.V |
|
|
|||||||||||||||||||||||||||||
JS28F320J3F75 датащи(HTML) 48 Page - Numonyx B.V |
|
48 / 67 page ![]() Datasheet 47 Numonyx® Embedded Flash Memory (J3 65 nm) Single Bit per Cell (SBC) 11.0 Device Command Codes For a complete definition on device operations refer to Section 8.4, “Device Commands” on page 33. The list of all applicable commands are included here one more time for the convenience. Note: Some customer applications use illegal or invalid commands (like 0x00) accidentally or intentionally with the device. An illegal or invalid command caused the device output to change to Array Read mode on 130nm. On the 65nm device, the output will change to Read Status Register mode. After an illegal or invalid command, software may attempt to read the device. If the illegal command was intentional, software will expect to read array data on 130nm device, such as 0xFFFF in an unprogrammed location. On the 65nm device, software may not get the expected array data and instead the status register is read. Please refer to the legal and valid commands/spec defined in the Datasheet, such as forread mode, issue 0xFF to Read Array mode, 0x90 to Read Signature, 0x98 to Read CFI/OTP array mode. Table 34: Command Bus Cycles and Command Codes Command Setup Write Cycle Confirm Write Cycle Address Bus Data Bus Address Bus Data Bus Program Enhanced Configuration Register Register Data 0060h Register Data 0004h Program OTP Register Device Address 00C0h Register Offset Register Data Clear Status Register Device Address 0050h — — Program STS Configuration Register Device Address 00B8h Device Address Register Data Read Array Device Address 00FFh — — Read Status Register Device Address 0070h — — Read Identifier Codes (Read Device Information) Device Address 0090h — — CFI Query Device Address 0098h — — Word/Byte Program Device Address 0040h/ 0010h Device Address Array Data Buffered Program Block Address 00E8h Block Address 00D0h Block Erase Block Address 0020h Block Address 00D0h Program/Erase Suspend Device Address 00B0h — — Program/Erase Resume Device Address 00D0h — — Set Block Lock Bit Block Address 0060h Block Address 0001h Clear Block Lock Bits Device Address 0060h Device Address 00D0h Blank Check Block Address 00BCh Block Address 00D0h |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |