| поискавой системы для электроныых деталей |
|
AD1986ABSTZ датащи(PDF) 49 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
AD1986ABSTZ датащи(HTML) 49 Page - Analog Devices |
|
49 / 56 page ![]() AD1986A Rev. 0 | Page 49 of 56 FUNCTION SELECT REGISTER (REGISTER 0x66, PAGE 01) This register is used to select which function (analog I/O pins), information and I/O (0x6801), and sense (0x6A01) registers apply to it. The AD1986A associates FC = 0x0 with surround functions and FC = 0x01 with front functions. These are changed in the AD1986A to align with the device pinout and to separate LINE_OUT functions. Reg Name D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 Default 0x661 Function Select x x x x x x x x x x x FC3 FC2 FC1 FC0 T/R 0x0000 Table 113. Register Function T/R (FIP or Ring Selection Bit) This bit sets which jack conductor the sense value is measured from. Software will program the corresponding rng/tp selector bit together with the I/O number in bits FC [3:0]. Once software programs the value and properly reads it back to confirm selection and implementation, it will access the rest of the bits fields in the descriptor. Mono inputs and outputs should report the relevant function and sense information when T/R is set to 0 (tip). The FIP bit should report 0 (Page 0x01, Register 0x68, Bit 0 reports no function information present) when T/R is set to a 1 on a mono input or output. T/R Function 0 Tip (left channel) Default 1 Ring (right channel) These bits specify the type of audio function described by this page. These bits are read/write and represent current AC ’97 Revision 2.2 defined I/O capabilities. Software will program the corresponding I/O number in this field together with the tip/ring selector bit T/R. Once software programs the value and properly reads it back to confirm selection and implementation, it will access the rest of the bits fields in the descriptor. FC [3:0] Function Default FC [3:0] Function Code Bits 0x0 DAC 1 (master out). maps to front DACs (L/R) Default 0x1 DAC 2 (AUX out). maps to surround DACs (L/R) 0x2 DAC 3 (C/LFE). maps to C/LFE DACs 0x3 S/P-DIF out 0x4 Phone in 0x5 MIC_1 (Mic select = 0) 0x6 MIC_2 (Mic select = 1) 0x7 Line in 0x8 CD in 0x9 Video in Not supported on the AD1986A 0xA Aux in 0xB Mono out 0xC Headphone ut 0xD–0xF Reserved x Reserved. Default: 0 |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |