Chip Errata

DSP56366 Digital Signal Processor

Mask:2J26D

DSP56366 Errata

366CE2J26D_0_0

NG 11/12/01 pg. 22 of 25

 1997 -2001, Motorola

ED38

Description (added 7/14/99):

If Port A is used for external accesses, the BAT bits in the AAR3-0

registers must be initialized to the SRAM access type (i.e. BAT = 01) or to

the DRAM access type (i.e. BAT = 10). To ensure proper operation of Port

A, this initialization must occur even for an AAR register that is not used

during any Port A access. Note that at reset, the BAT bits are initialized to

00.

Pertains to: DSP56300 Family Manual, Port A Chapter (Chapter 9 in

Revision 2), description of the BAT[1 –0] bits in the AAR3 - AAR0

registers. Also pertains to the core chapter in device-specific user’s

manuals that include a description of the AAR3 - AAR0 registers with bit

definitions (usually Chapter 4).

2J26D

Errata Description

Applies

to Mask

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com