IN100-Q1-R-RC1F datasheet(11/49 Pages) ETC

11 / 49 page

10 / 47

www.inplay-tech.com

N1EDOC-DS-IN100-EN-V1.3

Real time measurement data: Measurements come from internal on-chip sensors or

external sensors with either analog or digital outputs to the device.

Types of advertising & data encryption: Continuous advertising and event-driven advertising

are available; data can be encrypted or unencrypted, with or without authentication.

Continuous advertising: Upon power-on, an advertising beacon is sent in every advertising

interval, which is configurable.

Event driven advertising: An advertising beacon is sent only when triggered by external

events. An example event is when a sensor ADC measurement is larger or smaller than a

predefined threshold.

The device supports privacy with a random or resolvable advertising address. It supports

enhanced privacy of the user data payload through the built-in hardware security engine.

Load switch control: Two power supply switches are available to provide power to any external

circuitry, including sensor ICs. These two switches can be event-driven or timer-driven.

Switch 0 (SW0), ties the supply pin of the powered device to VCC when ON.

Switch 1 (SW1), ties the supply pin of the powered device to GND when ON.

Power domain: There are two power domains, Always-ON (AON) domain and Dynamic ON/OFF

Power Domain (DOOPD).

Figure 2 shows the workflow and features of the NanoBeacon™ SoC IN100 product family.

Figure 2：NanoBeaconTM features overview

IN100-Q1-R-RC1F датащи(PDF) 11 Page - List of Unclassifed Manufacturers