W6100 datasheet(3/149 Pages) WIZNET

3 / 149 page

W6100 – Hardwired Dual TCP/IP Stack Controller

3/149

Features

Supports hardwired TCP/IP protocols

: TCP, UDP, IPv6, IPv4, ICMPv6, ICMPv4, IGMP, MLDv1, ARP, PPPoE

Supports IPv4/IPv6 dual stack

Supports 8 independent SOCKETs simultaneously with 32KB memory

Supports SOCKET-less commands

: ARP, ICMPv6 (ARP, DAD, NA, RS) command for IPv6 auto-configuration & network

monitoring (PING, PING6)

Supports Ethernet PHY power down mode & system clock switching for power save

Supports wake on LAN over UDP

Supports serial & parallel HOST interface

: High speed SPI (MODE 0/3), system BUS with 2 address signal & 8bit data

Internal 32Kbytes memory for TX/ RX Buffers

10BaseT/ 10BaseTe / 100BaseTX Ethernet PHY integrated

Supports auto negotiation (full/half duplex, 10 and 100-based)

Supports auto-MDIX only on auto-negotiation mode

Does not support IP fragmentation & jumbo packet

3V operation with 5V I/O signal tolerance

Network indicator LEDs (full/half duplex, link, 10/100 speed, active)

48 Pin LQFP & QFN lead-free package (7x7mm, 0.5mm pitch)

PIN-2-PIN compatible with W5100S

Target Applications

W6100 can be used in various applications.

Home network devices: set-top boxes, PVRs, digital media adapters

Serial-to-Ethernet: access control, LED display, wireless AP relay

Parallel-to-Ethernet: POS / mini printers, copy machine

USB-to-Ethernet: storage devices, network printers

GPIO-to-Ethernet: Home network sensors

Security systems: DVR, network cameras, kiosks

Factory & home automation

Medical monitoring equipment

Embedded servers

Internet of Thing (IoT) devices

IoT cloud devices

Etc

W6100 датащи(PDF) 3 Page - WIZnet Co., Ltd