W6100 datasheet(76/149 Pages) WIZNET

номер детали	W6100

подробное описание детали	Hardwired Dual TCP/IP Stack Controller

PDF	149 Pages

Scroll/Zoom	100%

производитель	WIZNET [WIZnet Co., Ltd]

домашняя страница	https://www.wiznet.io/ko/Product/

Logo

76 / 149 page

W6100 – Hardwired Dual TCP/IP Stack Controller

76/149

5.1.1.3

Data Phase

The length of data phase is selected among N-byte(VDM) or 1,2,4 bytes(FDM) which is

designated in SPI operation mode bits(OM[1:0]) of control phase. Data is transferred through

MOSI or MISO signal from MSB to LSB sequentially.

5.1.2 Variable Length Data Mode (VDM)

In this mode, the data phase length of SPI Frame is determined by CSn which is controlled by

the HOST.

The OM[1:0] of control phase must be set to ’00’ value for VDM mode

5.1.2.1

Write Access in VDM

Figure 9 shows the SPI frame and SPI signals in write access.

In the VDM, CSn(High-to-Low) by HOST informs the start of SPI frame and CSn(Low to High) by

HOST informs the end of SPI Frame to W6100.

In the control phase, RWB is "1" to indicate write access and OM[1:0] is "00" to indicate VDM.

The data bits transmitted through MOSI are synchronized to the SCLK (Falling-Edge).

If more than one byte of data is transmitted continuously, it supports sequential data write.

Figure 9 Write SPI Frame in VDM

W6100 датащи(PDF) 76 Page - WIZnet Co., Ltd