S71PL129JC0 datasheet(48/149 Pages) SPANSION

48 / 149 page

S29PL129J for MCP

S29PL129J_MCP_00_A0 June 4, 2004

Advance

Info rmation

Chip Erase Command Sequence

Chip erase is a six bus cycle operation. The chip erase command sequence is ini-

tiated by writing two unlock cycles, followed by a set-up command. Two

additional unlock write cycles are then followed by the chip erase command,

which in turn invokes the Embedded Erase algorithm. The device does not require

the system to preprogram prior to erase. The Embedded Erase algorithm auto-

matically preprograms and verifies the entire memory for an all zero data pattern

prior to electrical erase. The system is not required to provide any controls or tim-

ings during these operations. Table 12 shows the address and data requirements

for the chip erase command sequence.

When the Embedded Erase algorithm is complete, that bank returns to the read

mode and addresses are no longer latched. The system can determine the status

of the erase operation by using DQ7, DQ6, DQ2, or RY/BY#. Refer to “Write Op-

eration Status” on page 56 for information on these status bits.

Any commands written during the chip erase operation are ignored. Note that Se-

cured Silicon Sector, autoselect, and CFI functions are unavailable when a

[program/erase] operation is in progress. However, note that a hardware reset

immediately terminates the erase operation. If that occurs, the chip erase com-

mand sequence should be reinitiated once that bank has returned to reading

array data, to ensure data integrity.

Figure 5 illustrates the algorithm for the erase operation. See the Erase/Program

Operations tables in AC Characteristics for parameters, and Figure 16 for timing

diagrams.

Note: See Table 12 for program command sequence.

Figure 4. Program Operation

START

Write Program

Command Sequence

Data Poll

from System

Verify Data?

Yes

Last Address?

Yes

Programming

Completed

Increment Address

Embedded

Program

algorithm

in progress

S71PL129JC0 датащи(PDF) 48 Page - SPANSION

S71PL129JC0 датащи(HTML) 48 Page - SPANSION

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL