TLE9255WLC datasheet(99/100 Pages) INFINEON

99 / 100 page

Data Sheet

Rev. 1.02 2018-02-02

TLE9255W

Revision History

Revision Date

Changes

1.00

2016-09-15

Data Sheet Rev. 1.0 created

1.01

2017-02-27

• SWK_ACTIVE bit description changed in register SWK_STAT

• Internal state transitions have higher priority than mode change SPI commands

• tFD_Glitch_10 and tFD_DOM_10 removed (Chapter 10.5.2)

1.02

2018-02-02

• ESD immunity at CANH, CANL, WAKE and VBAT versus to GND set from +-8 kV to

+-10 kV

• ESD immunity at all other pins set from +-2kV to +-4 kV

• ESD robustness according to IEC 61000-4-2 changed form +-8 kV to +-10 kV

• Tightening of limits for VBAT and VCC supply current at Receive-only Mode

(P_10.2.5)

• Tightening of limits for VIO supply current at Normal-operating Mode (P_10.2.4)

• Tightening of limits for VCC supply current dominant bus signal at Normal-

operating Mode (P_10.2.2)

• Tightening of limits for VBAT supply current at Normal-operating Mode (P_10.2.1)

• Tightening of limits for VIO supply current at Receive-only Mode (P_10.2.7)

• Pin configuration for TSON Package added (Figure 2)

• Test condition for the Parameter Absolute current on CAN_L (P_10.04.14)

compliant to ISO 11898-2 (2016).

• Test condition for the Parameter Absolute current on CAN_H (P_10.04.13)

compliant to ISO 11898-2 (2016)

• Test condition for the Parameter Driver Symmetry (P_10.04.12) compliant to

ISO 11898-2 (2016).

• Test condition for the Parameter Input resistance deviation between CANH and

CANL(P_10.04.26) compliant to ISO 11898-2 (2016).

TLE9255WLC датащи(PDF) 99 Page - Infineon Technologies AG