For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824

Phone: 978-250-3343

Fax: 978-250-3373

Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

4

HMC702LP6CE

v10.0812

14 GHz 16-BIT FRACTIONAL-N PLL

Table 1. Electrical Specifications

Parameter

conditions / notes

Min

typ

Max

Units

Max temperature

readout: 111

+82

°c

temp change / LSB

17.5

°c/LSB

Worst case absolute temp Error

±10

°c

current consumption (when Enabled)

2

ma

Power on Reset all digital inputs must be <0.7V prior to application of power for proper reset

typical reset Voltage on DVDD

700

mV

Min DVDD Voltage for no reset

1.5

V

Closed Loop Phase Noise

12 GHz Vco, integer, 100 MHz PFD

1 kHz offset

-96

dBc/Hz

12 GHz Vco, integer, 100 MHz PFD

10 kHz offset

-105

dBc/Hz

12 GHz Vco, integer, 100 MHz PFD

100 kHz offset

-111

dBc/Hz

12 GHz Vco, Fractional, 50 MHz PFD

1 kHz offset

-92

dBc/Hz

12 GHz Vco, Fractional, 50 MHz PFD

10 kHz offset

-98

dBc/Hz

12 GHz Vco, Fractional, 50 MHz PFD

100 kHz offset

-103

dBc/Hz

Closed Loop Phase Noise

normalized to 1 Hz

integer Mode

Measured with 50 MHz PFD

-227

dBc/Hz

Fractional Mode

Measured with 50 MHz PFD

-221

dBc/Hz

(Continued)

Table 2. Absolute Maximum Ratings

Parameter

Rating

rVDD, VccHF, DVDD,

DVDDQ, VccPrS

-0.3 to +3.6V

Vccoa, VPPcP, VPPDrV, VDDPD,

VDDPDV, VDDPDr, DVDDio

-0.3 to +6V

operating temperature

-40 to +85 °c

Storage temperature

-65 to +120 °c

Maximum Junction temperature

+125 °c

thermal resistance (rth) (Junction

to ground paddle)

25°c/W

reflow Soldering

Peak temperature

260 °c

time at Peak temperature

40 sec

ESD Sensitivity (HBM)

class 1B

Stresses above those listed under absolute Maximum

ratings may cause permanent damage to the device. this

is a stress rating only; functional operation of the device

at these or any other conditions above those indicated in

the operational section of this specification is not implied.

Exposure to absolute maximum rating conditions for

extended periods may affect device reliability.

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D