MCP19124 datasheet(93/236 Pages) MICROCHIP

93 / 236 page

 2016 Microchip Technology Inc.

DS20005619A-page 93

MCP19124/5

13.3

Interrupt Control Registers

13.3.1

INTCON REGISTER

The INTCON register is a readable and writable

for the TMR0 register overflow, interrupt-on-change

and external INT pin interrupts.

Note:

Interrupt flag bits are set when an interrupt

condition occurs, regardless of the state of

its corresponding enable bit or the Global

Enable bit (GIE) in the INTCON register.

The user’s software should ensure the

appropriate interrupt flag bits are clear

prior to enabling an interrupt.

INTCON: INTERRUPT CONTROL REGISTER

R/W-0

R/W-x

GIE

PEIE

T0IE

INTE

IOCE

T0IF

INTF

IOCF

bit 7

bit 0

Legend:

R = Readable bit

W = Writable bit

U = Unimplemented bit, read as ‘0’

-n = Value at POR

‘1’

= Bit is set

‘0’

= Bit is cleared

x = Bit is unknown

bit 7

GIE: Global Interrupt Enable bit

= Enables all unmasked interrupts

= Disables all interrupts

bit 6

PEIE: Peripheral Interrupt Enable bit

= Enables all unmasked peripheral interrupts

= Disables all peripheral interrupts

bit 5

T0IE: TMR0 Overflow Interrupt Enable bit

= Enables the TMR0 interrupt

= Disables the TMR0 interrupt

bit 4

INTE: INT External Interrupt Enable bit

= Enables the INT external interrupt

= Disables the INT external interrupt

bit 3

IOCE: Interrupt-on-Change Enable bit (1)

= Enables the interrupt-on-change

= Disables the interrupt-on-change

bit 2

T0IF: TMR0 Overflow Interrupt Flag bit (2)

= TMR0 register has overflowed (must be cleared in software)

= TMR0 register did not overflow

bit 1

INTF: External Interrupt Flag bit

= The external interrupt occurred (must be cleared in software)

= The external interrupt did not occur

bit 0

IOCF: Interrupt-on-Change Interrupt Flag bit

= When at least one of the interrupt-on-change pins changed state

= None of the interrupt-on-change pins have changed state

Note 1: IOCx registers must also be enabled.

2: T0IF bit is set when TMR0 rolls over. TMR0 is unchanged on Reset and should be initialized before

clearing T0IF bit.

MCP19124 датащи(PDF) 93 Page - Microchip Technology

MCP19124 датащи(HTML) 93 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL