ML7344CE datasheet(44/154 Pages) LAPIS

44 / 154 page

FEDL7344C/E/J-05

ML7344C/E/J

44/154

Check Field

Comparison Code

Conditions for match

C-field

C_FIELD_CODE1 or C_FIELD_CODE2 or

C_FIELD_CODE3 or C_FIELD_CODE4 or

C_FIELD_CODE5

If one of the 5 comparison code is matched

M-field 1

st byte

M_FIELD_CODE1 or M_FIELD_CODE2

If one of the 2 comparison code is matched.

M-field 2

nd byte

M_FIELD_CODE3 or M_FIELD_CODE4

If one of the 2 reference pattern is matched.

A-field

A_FIELD_CODE1/2/3/4/5/6

If comparison codes are matched.

[Format C]

Field check can be controlled by setting disabled/enabled for each comarison code (1 byte). If all specified

Field data (specified table below) are matched, Field checking matching will be notified. However, if 1st byte of

Data field and C_FIELD_CODE5 are matched, even if other Field data(from 2nd byte to 9th byte) are not

matched, Field check result will be notified as ”match”.

Check Field

Comparison Code

Conditions for match

Data-field 1

st byte

C_FIELD_CODE1 or C_FIELD_CODE2 or

C_FIELD_CODE3 or C_FIELD_CODE4 or

C_FIELD_CODE5

If one of the 5 comparison code is matched

Data-field 2

nd byte M_FIELD_CODE1 or M_FIELD_CODE2

If one of the 2 comparison code is matched.

Data-field 3

rd byte M_FIELD_CODE3 or M_FIELD_CODE4

If one of the 2 comparison code is matched.

Data-field 4

th byte

A_FIELD_CODE1