| поискавой системы для электроныых деталей |
|
SPEAR320S датащи(PDF) 62 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
SPEAR320S датащи(HTML) 62 Page - STMicroelectronics |
|
62 / 113 page ![]() Pin description SPEAr320S 62/113 Doc ID 022508 Rev 2 Table 31. Ethernet signals description Signal name Description Dir. PL_GPIO_# / ball number Configuration mode (see Section 3.4.2) MII0 MII0_COL PHY collision This signal is asserted by the PHY when a collision is detected on the medium. This signal is not synchronous to any clock. (Active high) I PL_GPIO_13/A1 Alternate function MII0_CRS PHY CRS This signal is asserted by the PHY when either the transmit or receive medium is not idle. The PHY deasserts this signal when both transmit and receive medium are idle. This signal is not synchronous to any clock. (Active high) I PL_GPIO_12/D4 Alternate function MII0_MDC Management data clock The MAC provides timing reference for the MAC_MDIO signal through this aperiodic clock. The maximum frequency of this clock is 2.5 MHz.This clock is generated from the application clock (HCLK) via a clock divider. O PL_GPIO_11/E5 Alternate function MII0_MDIO Management data input/output IO PL_GPIO_10/C3 Alternate function MII0_RXCLK Reception clock This is the reception clock (25/2.5 MHz in 100M/10Mbps) provided by the external PHY for MII interfaces. The MII0_RXDn signals that the Ethernet controller receives are synchronous to this clock. I PL_GPIO_20/B4 Alternate function MII0_RXD0 PHY receive data These bits provide the MII receive data nibble. The validity of the data is qualified with MII0_RXDV and MII0_RXER. I PL_GPIO_17/C4 Alternate function MII0_RXD1 PL_GPIO_16/E6 Alternate function MII0_RXD2 PL_GPIO_15/B3 Alternate function MII0_RXD3 PL_GPIO_14/A2 Alternate function MII0_RXDV PHY receive data valid When high, indicates that the data on the MII0_RXDn bus is valid. It remains asserted continuously from the first recovered byte/nibble of the frame through the final recovered byte/nibble. I PL_GPIO_19/A3 Alternate function MII0_RXER PHY receive error When high, indicates an error or carrier extension in the received frame on the MII0_RXDn bus. I PL_GPIO_18/D5 Alternate function |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |