MEC1322 datasheet(116/456 Pages) MICROCHIP

116 / 456 page

MEC1322

DS00001719D-page 116

 2014 - 2015 Microchip Technology Inc.

9.8

Description

The Embedded Memory Interface (EMI) is composed of a mailbox, a direct memory interface, and an Application ID

The mailbox contains two registers, the HOST-to-EC Mailbox Register and the EC-to-HOST Mailbox Register, that act

as a communication portal between the system host and the embedded controller. When the HOST-to-EC Mailbox Reg-

ister is written an interrupt is generated to the embedded controller. Similarly, when the EC-to-HOST Mailbox Register

is written an interrupt is generated to the system host. The source of the system host interrupt may be read in the Inter-

rupt Source Register. These interrupt events may be individually prevented from generating a Host Event via the Inter-

rupt Mask Register.

The direct memory interface, which is composed of a byte addressable 16-bit EC Address Register and a 32-bit EC

Data Register, permits the Host to read or write a portion of the EC’s internal address space. The embedded controller

may enable up to two regions of the EC’s internal address space to be exposed to the system host. The system host

may access these memory locations without intervention or assistance from the EC.

The Embedded Memory Interface can be configured so that data transfers between the Embedded Memory Interface

data bytes and the 32- bit internal address space may be multiple bytes, while Host I/O is always executed a byte at a

time.

When the Host reads one of the four bytes in the Embedded Memory Interface data register, data from the internal 32-

bit address space, at the address defined by the Embedded Memory Interface address register, is returned to the Host.

This read access will load 1, 2, or 4 bytes into the Data register depending on the configuration of the ACCESS_TYPE

bits. Similarly, writing one of the four bytes in the data register will write the corresponding byte(s) from the data register

into the internal 32-bit address space as indicated by the ACCESS_TYPE bits. This configuration option is done to

ensure that data the EC treats as 16-bit or 32-bit will be consistent in the Host, even though one byte of the data may

change between two or more 8-bit accesses by the Host.

In addition, there is an auto-increment function for the Embedded Memory Interface address register. When enabled,

the Host can read or write blocks of memory in the 32- bit internal address space by repeatedly accessing the Embedded

Memory Interface data register, without requiring Host updates to the Embedded Memory Interface address register.

Finally, the Application ID Register may be used by the host to provide an arbitration mechanism if more than one soft-

ware thread requires access through the EMI interface. See Section 9.8.4, "Embedded Memory Interface Usage," on

page 118 for more details.

FIGURE 9-2:

EMBEDDED MEMORY INTERFACE BLOCK DIAGRAM

Host-to-EC

EC-to-Host

Memory Region 0 &

Memory Region 1

HOST

Host-to-EC Event

EC-to-Host Event

Host Interrupt Source

Embedded Memory

Address

Embedded Memory Data

Addr

Data

EMI

Host Event

MEC1322 датащи(PDF) 116 Page - Microchip Technology

MEC1322 датащи(HTML) 116 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL