| поискавой системы для электроныых деталей |
|
AN4650 датащи(PDF) 32 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
AN4650 датащи(HTML) 32 Page - STMicroelectronics |
|
32 / 102 page ![]() Reading output data AN4650 32/102 DocID027415 Rev 1 3.6 Rounding functions The rounding function can be used to auto address the LSM6DS3 registers for a circular burst-mode read. Basically, with a multiple read operation the address of the register that is being read goes automatically from the first register to the last register of the pattern and then goes back to the first one. 3.6.1 Rounding of FIFO output registers The rounding function is automatically enabled when performing a multiple read operation of the FIFO output registers FIFO_DATA_OUT_L (3Eh) and FIFO_DATA_OUT_H (3Fh). 3.6.2 Rounding of source registers It’s possible to apply the rounding function also to the source registers of the LSM6DS3 device, in order to verify with one multiple read whether new data was generated or a new interrupt event was detected. The rounding function on the source registers can be enabled by setting to 1 the ROUNDING_STATUS bit of the CTRL7_G register: when this function is enabled, with a multiple read operation the address of the register that is being read goes automatically from STATUS_REG (1Eh) to FUNC_SRC (53h) and goes back to WAKE_UP_SRC (1Bh). 3.6.3 Rounding of sensor output registers The rounding function can also be enabled for the following groups of output registers: Gyroscope output registers, from OUTX_L_G (22h) to OUTZ_H_G (27h); Accelerometer output registers, from OUTX_L_XL (28h) to OUTZ_H_XL (2Dh); First group of sensor hub output registers, from SENSORHUB1_REG (2Eh) to SENSORHUB6_REG (33h); Second group of sensor hub output registers, from SENSORHUB7_REG (34h) to SENSORHUB12_REG (39h). The output registers rounding pattern can be configured using the bits ROUNDING[2:0] of the CTRL5_C register, as indicated in Table 20. Table 20. Output registers rounding pattern ROUNDING[2:0] Rounding pattern 000 No rounding 001 Accelerometer only 010 Gyroscope only 011 Gyroscope + Accelerometer 100 1st group of Sensor Hub only 101 Accelerometer + 1st group of Sensor Hub 110 Gyroscope + Accelerometer + 1st group of Sensor Hub + 2nd group of Sensor Hub 111 Gyroscope + Accelerometer + 1st group of Sensor Hub |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |