| поискавой системы для электроныых деталей |
|
ICS1531 датащи(PDF) 48 Page - Integrated Circuit Systems |
|
|
|||||||||||||||||||||||||||||
ICS1531 датащи(HTML) 48 Page - Integrated Circuit Systems |
|
48 / 76 page ![]() ICS1531 Rev N 12/1/99 December, 1999 48 Chapter 6 Register Set ICS1531 Data Sheet - Preliminary Copyright © 1999, Integrated Circuit Systems, Inc. All rights reserved. 6.5.33 Register 31h: R_COARSE The R_COARSE Register is the first adjustment for the red channel of the ADC. It is used to coarsely adjust the analog signal used by the ADC. (See also Section 6.5.36, “Register 34h: R_FINE”.) 6.5.34 Register 32h: G_COARSE The G_COARSE Register is the first adjustment for the green channel of the ADC. It is used to coarsely adjust the analog signal used by the ADC. (See also Section 6.5.37, “Register 35h: G_FINE”.) Table 6-32. R_COARSE Register Bit Bit Name Bit Definition Ac- cess Spec. Func. Re- set 31:7- 31:6 Reserved Reserved. • See Section 6.1, “Reserved Bits”. • These bits can be programmed to ‘0’. –– 0 31:5 Reserved Reserved. • See Section 6.1, “Reserved Bits”. • This bit must be programmed to ‘1’. –– 1 31:4- 31:2 Reserved Reserved. • See Section 6.1, “Reserved Bits”. • These bits can be programmed to ‘0’. –– 0 31:1- 31:0 R_Coarse_ADJ [1-0] Red Coarse (Gain) Adjust [1-0]. These bits adjust the red channel of the ADC by adjusting the gain of the video amplifier for the analog signal used by the ADC. • 0 = The gain is 1.0 (default). • 1 = The gain is 1.2. • 2 = The gain is 1.4 (typical). • 3 = The gain is 1.6. R/W – 0 Table 6-33. G_COARSE Register Bit Bit Name Bit Definition Ac- cess Spec. Func. Re- set 32:7- 32:6 Reserved Reserved. • See Section 6.1, “Reserved Bits”. • These bits can be programmed to ‘0’. –– 0 32:5 Reserved Reserved. • See Section 6.1, “Reserved Bits”. • This bit must be programmed to ‘1’. –– 1 32:4- 32:2 Reserved Reserved. • See Section 6.1, “Reserved Bits”. • These bits can be programmed to ‘0’. –– 0 32:1- 32:0 G_Coarse_ADJ [1-0] Green Coarse (Gain) Adjust [1-0]. These bits adjust the green channel of the ADC by adjusting the gain of the video amplifier for the analog signal used by the ADC. • 0 = The gain is 1.0 (default). • 1 = The gain is 1.2. • 2 = The gain is 1.4 (typical). • 3 = The gain is 1.6. R/W – 0 |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |