CS4218 datasheet(31/44 Pages) CIRRUS

31 / 44 page

AGND - Analog Ground, PIN 23(L), 17(Q).

Analog ground. Must be connected to DGND with zero impedance.

Analog Inputs

RIN1 - Right Input #1, PIN 25(L), 19(Q).

Right analog input #1. Full scale input, with no gain, is 1Vrms, centered at REFBUF.

RIN2 - Right Input #2, PIN 26(L), 20(Q).

Right analog input #2. Full scale input, with no gain, is 1Vrms, centered at REFBUF.

LIN1 - Left Input #1, PIN 27(L), 21(Q).

Left analog input #1. Full scale input, with no gain, is 1Vrms, centered at REFBUF.

LIN2 - Left Input #2, PIN 28(L), 22(Q).

Left analog input #2. Full scale input, with no gain, is 1Vrms, centered at REFBUF.

Analog Outputs

ROUT - Right Channel Output, PIN 15(L), 9(Q).

Right channel analog output. Maximum signal is 1 Vrms centered at REFBUF.

LOUT - Left Channel Output, PIN 16(L), 10(Q).

Left channel analog output. Maximum signal is 1 Vrms centered at REFBUF.

REFBYP - Analog Reference Decoupling, PIN 21(L), 15(Q).

A 10

µF and 0.1 µF capacitor must be attached between REFBYP and REFGND.

REFGND - Analog Reference Ground Connection, PIN 22(L), 16(Q).

Connect to AGND.

REFBUF - Buffered Reference Out, PIN 20(L), 14(Q).

A nominal +2.1V output for setting the bias level for external analog circuits.

Serial Digital Audio Interface Signals

SDIN - Serial Port Data In, PIN 42(L), 36(Q).

Digital audio data to the DACs and level control information is received by the CS4218 via

SDIN.

SDOUT - Serial Port Data Out, PIN 43(L), 37(Q).

Digital audio data from the ADCs and status information is output from the CS4218 via

SDOUT.

SCLK - Serial Port Bit Clock, PIN 44(L), 38(Q).

SCLK controls the digital audio data on SDOUT and latches the data on SDIN. SCLK must be

synchronous to the master clock.

CS4218

DS135F1

CS4218 датащи(PDF) 31 Page - Cirrus Logic