DSPIC33FJMC202ESS datasheet(47/330 Pages) MICROCHIP

47 / 330 page

DS70283K-page 47

dsPIC33FJ32MC202/204 and dsPIC33FJ16MC304

TABLE 4-26:

FUNDAMENTAL ADDRESSING MODES SUPPORTED

4.5.3

MOVE AND ACCUMULATOR

INSTRUCTIONS

Move instructions and the DSP accumulator class of

instructions provide a greater degree of addressing

flexibility than other instructions. In addition to the

addressing

modes

supported

most

MCU

instructions, move and accumulator instructions also

support Register Indirect with Register Offset

Addressing mode, also referred to as Register Indexed

mode.

In summary, the following addressing modes are

supported by move and accumulator instructions:

• Register Direct

• Register Indirect

• Register Indirect Post-modified

• Register Indirect Pre-modified

• Register Indirect with Register Offset (Indexed)

• Register Indirect with Literal Offset

• 8-bit Literal

• 16-bit Literal

4.5.4

MAC INSTRUCTIONS

The dual source operand DSP instructions (CLR, ED,

EDAC, MAC, MPY, MPY.N, MOVSAC and MSC), also referred

to as MAC instructions, use a simplified set of addressing

modes to allow the user application to effectively

manipulate the data pointers through register indirect

tables.

The two-source operand prefetch registers must be

members of the set {W8, W9, W10, W11}. For data

reads, W8 and W9 are always directed to the X RAGU,

and W10 and W11 are always directed to the Y AGU.

The effective addresses generated (before and after

modification) must, therefore, be valid addresses within

X data space for W8 and W9 and Y data space for W10

and W11.

In summary, the following addressing modes are

supported by the MAC class of instructions:

• Register Indirect

• Register Indirect Post-Modified by 2

• Register Indirect Post-Modified by 4

• Register Indirect Post-Modified by 6

• Register Indirect with Register Offset (Indexed)

4.5.5

OTHER INSTRUCTIONS

Besides the addressing modes outlined previously, some

instructions use literal constants of various sizes. For

example, BRA (branch) instructions use 16-bit signed

literals to specify the branch destination directly, whereas

the DISI instruction uses a 14-bit unsigned literal field. In

some instructions, such as ADD Acc, the source of an

operand or result is implied by the opcode itself. Certain

operations, such as NOP, do not have any operands.

Addressing Mode

Description

File Register Direct

The address of the file register is specified explicitly.

The contents of a register are accessed directly.

The contents of Wn forms the Effective Address (EA).

The contents of Wn forms the EA. Wn is post-modified (incremented

or decremented) by a constant value.

Wn is pre-modified (incremented or decremented) by a signed constant value

to form the EA.

(Register Indexed)

The sum of Wn and Wb forms the EA.

The sum of Wn and a literal forms the EA.

Note:

For the MOV instructions, the addressing

mode specified in the instruction can differ

for the source and destination EA.

However, the 4-bit Wb (Register Offset)

field is shared by both source and

destination (but typically only used by

one).

Note:

Not all instructions support all the

addressing modes given above. Individual

instructions may support different subsets

of these addressing modes.

Note:

Addressing mode is available only for W9

(in X space) and W11 (in Y space).

DSPIC33FJMC202ESS датащи(PDF) 47 Page - Microchip Technology

DSPIC33FJMC202ESS датащи(HTML) 47 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL